Description: Used with the short hook push button on the right side of the dial: pb05 These are the wafer type phenolic switch contact assemblies that originally had a short hook-type pushbutton attached to the long end. There are two types: one has the brass eyelet located on the long end of the wafer, the other has it located near the short end of the wafer. You will have to examine your originals to determine which ones you need. Usually, 4 with the eyelet closer to the long end and 2 with the eyelet closer to the short end. Color may vary from that pictured here. PRICE IS FOR ONE! Dimensions: 1-1/2" long, 3/16" wide, 5/16" widest part Installing the switch slides: Disconnect the push-button assembly from the radio. The assembly is held together with metal posts that have been split and spread with a chisel. If you grab the post with pliers and squeeze, you can squeeze the split part back together. It probably won't be reduced in thickness enough yet to fit through the hole, but you can file the squeezed part down enough to get it to go through. Do that to both sides and you can change out the slides. Once you've installed the slides, push the posts back through the holes. Then set the assembly on a solid base like a workbench, anvil, or rock, and carefully drive a chisel into the posts to spread them again, or try peening them over with a ball peen hammer. You may have luck giving the post a slight twist with pliers. If you break a post while doing any of this, you can put the assembly back together and put some JB Weld around the posts to keep them in place. Some people just cut the posts off to get the assembly apart and use JB Weld to hold everything together afterward. SHIPPING: I try to ship all orders a day or two after I receive them. If by chance, the item is out of stock, it may take a few extra days for me to make more; longer if I have to make a new mold. In that case, I'll contact you to let you know. (I make nearly all of the radio parts in my listings.) If, after 7 business days, you haven't received your item, feel free to contact me. ABOUT: Nearly all of the parts available on my eBay store were made by Renovated Radios, LLC in Michigan. I've been making antique radio parts now for over 12 years. I still do some custom work, but most of my time is taken up by making over 350 different rubber and plastic parts for antique radios and some record players. CONTACT: Contact can be made through eBay Messaging.
Price: 5 USD
Location: Macomb, Michigan
End Time: 2024-09-24T22:16:11.000Z
Shipping Cost: 5.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Zenith
Country/Region of Manufacture: United States
