YQABLE Camber Gauge Castor Strut Wheel Alignment Adjustable Gauge Tool Camber...

Description: Size: approx. 12.7 x 5cm/ 5"" x 1.97"" (L*D) Specification: 100% brand new Measure the Camber and Caster angle on the wheel hub or brake disc Suitable for accurate checking of the castor and camber angle Has a simple leveling adjustment from -5 degrees to 5 degrees Gauge attaches to the hub or disc brake Allows adjustment to maintain correct wheel alignment and even tyre wear Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing How to use: 1. Remove the four-wheel positioning sensor (clamp) and remove the tire; 2. Carefully suck the level on the side of the brake wheel; 3. Adjust the level to zero; 4. Install the required positioning special parts; 5. Use special tools to adjust the positioning of the parts to the desired measurement angle with the help of the level indicator. 6. If you find a slight deviation with the locator, you only need to fine-tune it at the bottom of the car. (Generally, a small deviation will not cause a positioning fault) Size: approx. 12.7 x 5cm/ 5" x 1.97" (L*D) Material: metal Measure the Camber and Caster angle on the wheel hub or brake disc，Suitable for accurate checking of the castor and camber angle， toe angle. Has a simple leveling adjustment from -5 degrees to 5 degrees，Gauge attaches to the hub or disc brake Allows adjustment to maintain correct wheel alignment and even tyre wear Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing

Price: 19.31 USD

Location: Seattle, Washington

End Time: 2024-12-18T12:56:31.000Z

Shipping Cost: 0 USD