Cardinal

X99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPU

Description: MACHINIST X99 B9 Motherboard Specification: Motherboard Model: MAchinist X99-B9 Compatible Processor: Support Intel Xeon E5-XXXX-V4, Xeon E5-XXXX-V3, and Intel Core i7 6950X/6900K/6850K/6800K/5960X/5930K/5820K, etc. series CPU on LGA 2011-3 Socket Chipset: Intel C612 chipset CPU Socket: LGA 2011-3 RAM Memory Technology: 4 x DDR4 DIMM memory slots, support maximum memory 128GB (32GB*4) Memory Description: Support DDR4 2133/2400MHz,the actual memory frequency support depends on the processor type; Quad channel memory architecture; Desktop memory, non-ECC, ECC, and RECC memory; Compatible Devices: Personal Computer, Keyboard, Mouse, Printer, Projector,Microphone, Monitor, Video Card, etc. Platform: Windows 8, Windows 10, Windows 11, Linux Power Supply: The intel DDR4 mother board adopts 8-phase power supply Quick Boot Key: F11 - Turn x99 m-atx motherboard on, and press the F11 key continuously. Enter BIOS: Turn the server motherboard on, and press the main "DEL" key continuously. Size: 245*190*35 mm Form Factor: mATX BIOS Setting: Diskless Boot: Support Above 4G Decoding: Support Wake On LAN (WOL): Support Hibernation: Does not support Virtualisation (VT-D): Support Re-Size BAR Decoding: Support Restore AC Power Loss: Support RAID: Support RAID0, RAID1, RAID5 Boot without Graphics Card: Support Memory Timing Modification (XMP): Does not support CPU Fan Speed Modification: Support CPU_FAN1 interface only Expansion Slot: 1 x PCIe 3.0 x16 slot, 1 x PCIe 2.0 x4 slot 1 x PCIe 2.0 x1 slot Storage Device Slot: Support 6 x SATA 6Gb/s ports and 2 x M.2 slots, Dual M.2 socket, type 2242/2260/2280 (supports PCIe 3.0 x4 & SATA modes) Applicable Hard Disk: Supports 2.5-inch SATA SSD, 3.5-inch HDD, MVMe M.2 SSD, SATA M.2 SSD. LAN Connectivity and Audio: Realtek 8111H Gigabit LAN controller Realtek ALC897 High Definition Audio CODEC USB Port: 5 x USB 3.0 port(s), 5 x USB 2.0 port(s) (8 at back panel, 2 at mid-board) Back I/O Port: 2 x PS/2keyboard/mouse port(s) 1 x LAN(RJ45) port(s) 4 x USB 3.0 (blue) 4 x USB 2.0 3 x Audio jack(s) Internal I/O Port: 1 x USB 3.0 connector, 1 x USB 2.0 connector, 2 x M.2 slots (SATA/NVMe Protocol) 1 x SATA/NVMe M.2 Mode jumper 6 x SATA 6 Gb/s connectors, 1 x 4-pin PWM CPU Fan header 1 x 4-pin Chassis Fan header 1 x 3-pin Chassis Fan header 1 x Front Panel Audio header 1 x 24-pin EATX Power connector 1 x 8-pin ATX 12V Power connector 1 x Front Panel connector, 1 x 2-pin Clear CMOS header 1 x AUTO_ON header 1 x COM Port header 1 x Buzzer MACHINIST Protection: - Electro-Static Discharge - Overvoltage Protection - Overcurrent Protection MACHINIST Thermal Solution Power Chipset Aluminum Heatsink Chipset Aluminum Heatsink One 4-pin PWM CPU Fan Header CPU and System Fan: CPU_FAN1: Support intelligent temperature control, when CPU temperature is high, fan speed is fast, CPU temperature is low, fan speed is low. SYS_FAN1: Does not support temperature control, the fan will run at full speed; SYS_FAN2: Does not support temperature control, the fan will run at full speed; J_AUTO_ON1 Jumper Cap: It's Restore AC Power Loss jumper caps, default is OFF. If move the jumper cap to the right two pin for the "ON" state, when the motherboard is powered on, the motherboard will automatically boot. How to Clear CMOS: Power off remove all parts, and use tweezers or other metal conductive objects, short 2-pin header (JCMOS1) for 3-5 seconds. Packaging list: 1x MACHINIST X99 B9 Motherboard, 1x I/O Shield, 1x CPU Cooling Bracket, 1x SATA Cable Note: (1) The color of the bottom plate of the slot may vary from batch to batch, but it will not affect the use of the product. The product is constantly optimized and upgraded. (2) Please allow 1-3mm differences due to manual measurement. (3) Due to the different displays and different lights, the picture may not show the actual color of the item. Thanks for your understanding. (4) This platform needs a powerful power supply. please make sure your power supply can be enough to support this platform. (at least 500w brand power supply) (5) The battery in motherboard photos is not included and will be removed before shipping, as this battery is forbidden according to the logistics requirements.

Price: 69.59 USD

Location: Montclair, California

End Time: 2024-11-21T10:19:13.000Z

Shipping Cost: 0 USD

Product Images

X99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPUX99 Motherboard LGA 2011-v3 NVMe/SATA M.2 USB3.0 DDR4 SATA3.0 for Intel Xeon CPU

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 60 Days

Refund will be given as: Money back or replacement (buyer's choice)

Socket Type: LGA 2011-3

Compatible CPU Brand: Intel

Number of Memory Slots: 4

Input/Output Ports: Ethernet (RJ-45), PS/2, SATA III, USB 2.0, USB 3.0

MPN: X99 B9, X99 Mainboard

Most Suitable For: Casual Computing, Gaming, Graphic Design

Item Length: 245mm

Memory Type: DDR4 SDRAM

Brand: MACHINIST

Form Factor: MicroATX

Unit Type: Unit

Expansion Slots: M.2, PCI Express 2.0 x1, PCI Express 2.0 x4, PCI Express 3.0 x16

Manufacturer Warranty: 6 Months

Model: X99 B9

Features: On-Board Audio

Country/Region of Manufacture: China

Unit Quantity: 1

Item Width: 190mm

Recommended

Steel Parallel Set .0002" Hardened Precision Machinist Tools
Steel Parallel Set .0002" Hardened Precision Machinist Tools

$34.99

View Details
5 MATCHED PAIRS ULTRA PRECISION 1-2-3 BLOCKS 23 HOLES .0001" MACHINIST 123
5 MATCHED PAIRS ULTRA PRECISION 1-2-3 BLOCKS 23 HOLES .0001" MACHINIST 123

$59.99

View Details
Small Surface Gage, Vintage Machinists / Toolmakers Inspection Gauge
Small Surface Gage, Vintage Machinists / Toolmakers Inspection Gauge

$46.00

View Details
VINTAGE 2" MACHINIST PARALLEL ADJUSTABLE VISE CLAMPS UNBRANDED
VINTAGE 2" MACHINIST PARALLEL ADJUSTABLE VISE CLAMPS UNBRANDED

$18.99

View Details
24 Inch Westward Machinist Ruler Rule Tempered Inch Tool 64 32 16 8 2YNF8
24 Inch Westward Machinist Ruler Rule Tempered Inch Tool 64 32 16 8 2YNF8

$12.95

View Details
Ampco Safety Tools H-44Fg Machinist Hammer,1/4 Lb.,9-3/4" L
Ampco Safety Tools H-44Fg Machinist Hammer,1/4 Lb.,9-3/4" L

$74.19

View Details
58 Piece With 3/8-16 Studs 1/2 T-Slot Clamping Kit Mill Machinist Set New
58 Piece With 3/8-16 Studs 1/2 T-Slot Clamping Kit Mill Machinist Set New

$50.58

View Details
NEW Nicholson File 3-1/4"  Machinist's Scraper # 21667NN- Free Shipping
NEW Nicholson File 3-1/4" Machinist's Scraper # 21667NN- Free Shipping

$10.99

View Details
HORUSDY 28pc Center Punch Transfer Punch Set Steel Machinist Thread Tool Stand
HORUSDY 28pc Center Punch Transfer Punch Set Steel Machinist Thread Tool Stand

$19.99

View Details
1 Matched Pair Ultra Precision 1-2-3 Blocks 23 Holes .0002" Machinist 123 Jig
1 Matched Pair Ultra Precision 1-2-3 Blocks 23 Holes .0002" Machinist 123 Jig

$18.67

View Details