WS2815 DC12V LED Pixels Strip Light Waterproof

Description: New / Unopened Packages 5 meters = 16.4042 feet Can be controlled by Arduino, Raspberry Pi, Fadecandy, K1000C, SP105E, SP107E, SP110E, etc. 12V WS2812B LED Strip:WS2815 LED strip is an upgraded version of the 5V WS2812B LED strip. For the 5M LED strip, even if all the LEDs are turned on full white, the 12V version has no voltage drop. You don't need to inject power as frequently as the 5V version.Individually addressable:Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display. Dual-Signal Wires:WS2815 LED strip is Similar to the version of the 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work. Easy Installation:Self-adhesive tape on back FOR IP30/IP65, it can be fixed on any dry and flat surface without any screws and clips. Each LED can be cut off at the cutting line.There are 4-pin JST SM connectors and separated power/ground wires on both ends, which make it easy to hook up each other and wire for power. SPECIFICATION:IC Type :WS2815 ICGray Level: 256View Angle: 120°Input Voltage: DC12VColor: Full Color 24-bitFPCB Board Color: White/BlackPower: 0.3W/LED 30/60/144 LEDs/mModel: WS2815 Strip 5050RGB ChipsStorage Temperature: -30-+95 °COperating Temperature: -20 ~ +85°CLed Qty: 30/60/144pcs RGB SMD 5050 per meterThe Distance Between Two LEDs: 30Leds/m -- 28mm, 60Leds/m -- 12mm, 144Leds/m -- 1.92mmWavelength(nm): Red,650nm ; Green,520nm; Blue,460nmWaterproof level: IP67: Waterproof in SiliconTube Package Includes:1 x 1M/5M RGB 30/60/144leds/m LED Strip1 x 4pin ConnectorNOTE: The power adapter and controller are NOT included!

Price: 15 USD

Location: Side Lake, Minnesota

End Time: 2024-11-20T01:51:17.000Z

Shipping Cost: N/A USD