VSaero FRP TKYO Wide Body Fenders Flares (front) 40mm AE86 Trueno 3dr Hatch for

Description: About Store Contact Shipping Feedback VSaero FRP TKYO Wide Body Fenders Flares (front) 40mm AE86 Trueno 3dr Hatch for Corolla Toyota 84-87 vsaero_109280 Description / Notes: Part #: vsaero_109280 Make: Toyota Model: Corolla Material: FRP Condition: New Product Notes : VSaero FRP TKYO Wide Body Fenders Flares (front) 40mm AE86 Trueno 3dr Hatch for Corolla Toyota 84-87 vsaero_109280 Description : This is a TKYO Wide Body Fenders Flares (front) 40mm manufactured or distributed by VSaero primarily made of FRP material. VSaero FRP parts are manufactured with fiberglass and plastic resin which strengthens (F)iber (R)einforced (P)lastic. Using FRP allows VSaero to form aggressive styles of various sizes or shapes while still retaining a large degree of strength. when installing new unpainted and unfinished fiberglass parts there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape are not included. All fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment. New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer VSAero fenders and fender flares are aftermarket accessories specifically designed for track, show, and off-road use. These components are not intended for public road use, and VSAero disclaims any responsibility for damage, injury, or loss resulting from their use. Due to the nature of fiberglass and the manufacturing processes involved, VSAero fenders and fender flares are not “direct bolt-on” parts and often require significant preparation, such as trimming, cutting, sanding, fitting, or adding fiberglass. Installation may involve custom bodywork, and common issues like warping or fitment challenges can occur if not installed properly. Fender Flares VSAero fender flares are designed to extend the wheel arch for a more aggressive stance, often complementing the style of a complete body kit. Depending on the style, some fender flares may need to be attached using rivet nuts with a rubber gasket between the flare and the original fender, neither of which is included. Additionally, more aggressive flares may require cutting and rolling of the original fender to allow for greater wheel clearance and a lower stance. Due to the nature of fiberglass, adjustments during installation are common, and care must be taken to ensure proper alignment and fitment to avoid gaps or uneven surfaces. Fenders VSAero fenders offer an aesthetic upgrade, giving vehicles a sleeker and more customized appearance. These lightweight fiberglass replacements often require additional fiberglass reinforcement around the A-pillar and the fender mounting flange for durability and a secure fit. Trimming and reshaping the fender may be necessary to align with the vehicle’s mounting points. Modifications to factory components, such as removing fender liners or adjusting brackets, may be required to ensure proper installation. For best results, VSAero recommends professional installation by a custom shop experienced in working with fiberglass. Traditional auto repair shops may lack the necessary expertise for proper trimming, cutting, or modifying fiberglass components. VSAero fenders and fender flares are strictly for track, show, or off-road use. Due to Department of Transportation (DOT) regulations, most VSAero fenders and fender flares are not street legal. VSAero does not endorse or recommend using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 512 USD

Location: Las Vegas, Nevada

End Time: 2024-11-11T09:38:07.000Z

Shipping Cost: 0 USD