Vogelzang Pellet Stove Controller/thermostat

Description: Pellet stove controller designed to lower the heat output of a pellet stove and provide for longer run times. Works great as an away or overnight setting. Easily add 25 to 50% more run time on a fueling. Easy installation, simple operation. One button operation, press the button and the controller will interrupt the signal from the stoves vacuum sensor, temporarily slowing the feeding of pellets. The controller is fully adjustable for the amount of time it is active. The preset times are usually good for all stoves. Press the button again, and the stove goes back to its factory feed rate. Two wire installation. Unplug one wire from the stoves vacuum switch, one wire from the controller will then plug into the vacuum switch. The other wire from the controller will plug into the wire removed from the vacuum switch. The controller magnetically mounts to any cool portion of the stove. The controller then gets plugged into a USB power source. Plug and play, no wire cutting or modifications to the stove. The controller does not interfere with or change the stoves factory programming, does not supply power to any of the stoves components or alter any of the stoves safety functions. If the controller ever fails, the stove reverts to its factory output settings.Relay used in the controller is rated for a million cycles. Works on practically any stove with a vacuum switch- Castle Harman Vogelzang Grand Teton US Stove PelPro Englander King Breckwell Comfortbilt Quadra-Fire Ashley Lopi Cleveland Iron Works Can also be wired into a hopper safety switch on stoves that use one. I've sold hundreds of these controllers over the last several years. Check my feedback, it is 100% for a reason. If you order one and it doesn't perform as claimed, send it back. I will refund your money. Controller will come with detailed installation and adjustment instructions.

Price: 59.95 USD

Location: East Helena, Montana

End Time: 2024-12-26T21:52:39.000Z

Shipping Cost: 4.95 USD