Description: This is a very clever module. It detects the pulse from a CDU module to change the voltage on a FROG so the FROG has the correct polarity for the loco to pass over the turnout. It is very easy to connect to your layout, as shown in the wiring diagram, and has LEDs on the module to show the position of the point. Cost of module: $12.00 USD plus $6.50 USD shipping. This module is only designed for SOLENOID points such as PECO side-mounted point motors (with a double-acting solenoid and 3 connections to the solenoid) or PECO solenoid motor for mounting under your layout. You will need to firstly isolate the rails shown in the diagram as FROG rails and then connect the FROG rail to the module. The two wiring diagrams above show the two active states of the relay and the voltage on the GROG rail. If the FROG voltage is incorrect, simply reverse the two outer wires from the FROG module to the point. If the LEDs on the FROG module are incorrect, simply reverse the two outer wires from your CDU unit (refer to the 3-screw-terminal marked: FROM CDU UNIT). You will need to have a CDU module that activates your point with a full amount of energy because the FROG module absorbs a small amount of this energy each time the point is activated. This means you need a CDU unit with at least 20v activation voltage. You can purchase CDU units from Talking Electronics.com for less than $10.00 per module and connect the output of one of these CDU modules to the FROG module. Enquire about your particular layout before ordering: Contact Colin Mitchell talking at tpg.com.au Cost of module: $12.00 USD plus $6.50 USD shipping.
Price: 12 USD
Location: Springvale South, VIC
End Time: 2024-11-29T13:25:08.000Z
Shipping Cost: 6.5 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
scale: All Scales
Grading: Brand New
MPN: FROG Module
Brand: Talking Electronics
