TRUCK INTERIOR DOOR GUN MOUNTING RACKS

Description: PROUDLY 100% MADE IN THE USACAVE JUNCTION, OREGON LAST RACK YOU'LL BUY AND THE FIRST YOU'LL BRAG ABOUT! This unique rack is designed to keep your rifle safe during transport with EXTREMELY EASY ACCESS. You open your truck door and your rifle is "there". No reaching down, behind or overhead. Can be easily removed at any time and reinstall in just minutes. WE ARE NOW MANUFACTURING RACKS TO FIT YOUR AR AND AK WEAPONS. This rack fits 99% of Ford, Dodge & Chevy trucks. TOYOTA SR5, 4RUNNER & TUNDRA. ( racks for older vehicles also available.) LET US KNOW WHAT VEHICLE YOU HAVE AND WE'LL MAKE A RACK TO FIT IT IF POSSIBLE ***You will need to specify the YEAR, MODEL and MAKE of your truck along with which door you want to place it on, (driver or passenger). IF YOU DON'T GIVE US SPECIFIC INFORMATION ON YOUR VEHICLE A "STANDARD" RACK WILL BE SHIPPED. If you have a OLDER truck we will custom make the top support bracket for what ever vehicle you have if possible at no extra charge. WE URGE YOU contact us so we can make sure we can fit your vehicle. WE'LL GET BACK TO YOU ASAP. If you have a Quad cab......You're going to need 4! You're buddies are going to get upset if they don't have one to use while hunting with you. KEEP IT UP & KEEP IT SAFE. Photos 6 & 7 show the inside application on a typical door panel. Photo 8 shows just the rack and boot FREE SHIPPING INSTALLATION INSTRUCTIONS LOWER BOOT ASSEMBLY Attach the “L” Bracket to the Base Bar. Loosely attach the Boot to the Base Bar. The large end goes forward. Position on the door with clamp or tape to verify that is does not interfere with the door closing or rubbing on the floor, Adjust as Necessary! Drill a ¼” hole & secure with (1) ¼”-20x5/8” machine bolt w/washer & nut in the TOP hole. The lower hole will be drilled and secured after the pitch for the rifle butt is verified. *You will come back and secure the other bolt once the upper rack is installed!!! UPPER ASSEMBLY Locate the best location for the Upper Bracket so that there is clearance for your knuckles between the steering wheel and the Upper Bracket. You must be able to access the door/window controls also. Mark location of the (2) holes for the upper bracket and drill 3/8” holes. *YOU MAY WISH TO START WITH SMALLER HOLES AND WORK UP.) Install the well nuts with the screws attached into the 3/8” holes you just drilled. Gently shove the well nuts into the holes using the screw heads for leverage. Remove the screws, install the upper bracket and tighten the screws. The safety band is preinstalled for your convenience. GO BACK TO THE LOWER BRACKET. Hold your rifle in the lower boot to verify the proper angle for the butt stock. (it should rest squarely on the bottom of the butt plate) Mark the angle. Remove the boot to access the second (lower) hole. Drill and insert (1) ¼”-20x5/8” bolt, washer and nut. Secure the lower bracket. Re-Install the boot and tighten all bolts. ***If in doubt on any procedure, please feel free to call us and we’ll walk you thru the installation. GOOD LUCK ON “YOUR EXPEDITIONS”, SEND US PICTURES & STORIES, WE’LL POST THEM ON OUR WEBSITE. PAT & SANDY UPTON Congratulations and Happy Hunting! Keep it UP and Keep it SAFE! Patent Pending MADE IN THE USA

Price: 70 USD

Location: Cave Junction, Oregon

End Time: 2023-10-15T14:25:12.000Z

Shipping Cost: 0 USD