Description: Get ready to experience powerful sound with the TARAMPS HD 3000 2ohms + TS 400x4 2ohms + Pro 2.4S Kit Audio Car Amplifier. This high-quality car amplifier is designed to provide you with a premium audio experience, whether you're driving on the highway or cruising around town. With a RMS power of 3000W, this amplifier is capable of delivering powerful sound without compromising on clarity. The TARAMPS HD 3000.1 20ohms + TS 400x4 + Pro 2.4S Kit Audio Car Amplifier is made in Brazil and features mono channels for an immersive audio experience. Whether you're a music enthusiast or a casual listener, this car amplifier is sure to impress. So why wait? Upgrade your car audio system today with the TARAMPS HD 3000.1 20ohms + TS 400x4 + Pro 2.4S Kit Audio Car Amplifier. Technical specifications: • Operating class: class d.This is the designation of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, allowing for a small, efficient amplifier with reduced heating when compared to other construction classes. • Number of channels: 01.Number of channels for use in your project, with this specific model you have the option of connecting only 1 channel. • Power @12.6v – 2 ohms: 3000w rms.The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply. • Power @12.6v – 4 ohms: 2025w rms.The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply. • Power @12.6v – 8 ohms: 1140w rms. The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply. • Minimum output impedance: 2 ohms. Association with the speaker result, where, for example, we can connect two 4-ohm speakers or four 8-ohm speakers to the channel for this result. • Minimum output impedance: 4 ohms. Association with the speaker result, where, for example, we can connect two 8-ohm speakers to the channel or just one 4-ohm speaker for this result. Minimum output impedance: 8 ohms. Association with the speaker result, where, for example, we can connect only one 8-ohm speaker to the channel for this result. • Minimum input sensitivity: 230mv. The lowest voltage required for maximum results with the amplifier, i.e., with low radio volume, we will already be able to obtain good results. • Frequency response: 10hz ~ 20khz (-3db). With the frequency response, it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is within this response, it means that we can use this product in your project. • Variable low pass crossover (lpf): 80hz ~ full. LPF or low pass filter (English term) means low pass filter, i.e., it allows everything below this reference to be reproduced and everything above this indication will not be used. A common use of this function is to reduce the presence of voice in subwoofers. • Variable high pass crossover (hpf): 10hz ~ 80hz.Hpf or high pass filter (English term), means high pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example. • Bass boost: 0 ~ 10.5db (50hz).Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. • Power supply voltage: 9 to 16v.This is the indication of the amplifier's operation where it will have the minimum and maximum voltage for its operation; outside this specification, it will not turn on or activate a protection. • Consumption at rest: 1.7a.This is the reference for the amplifier's consumption when turned on and without music. • Maximum musical consumption: @12.6vdc: 143.5a.This is the estimated consumption of the amplifier working at minimum impedance playing music at maximum volume. • Maximum consumption in sinusoidal signal: @12.6vdc: 287a. Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. • Protection system: short circuit in the output/high/low supply voltage/thermal protection. This system exists to protect the operation of the amplifier, it may be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier has above-normal heating. • Dimensions: width 22.9cm x height 6.5cm x depth 18.6cm. Extreme dimensions of the product. • Weight: 2.5kg. We will reciprocate positive feedback for a successful transaction. If you are happy with our service, please leave us feedback. WARNING:Shipping: Shipment of the product in 1 to 4 business days, shipments are by UPS or Fedex, as soon as the contracted service picks up the product, the tracking number is given to you. Please do on ebay.If UPS or Fedex cannot find the buyer at home and the product is returned, we will not refund the shipping cost, we will deduct a 20% fee from the product value for store administrative costs. Stay tuned for tracking number updatesnot charge tracking number if you purchased on Friday night, Saturday and Sunday, we ship products during business hours.Please check your shipping address if it is correct on Ebay, we are not responsible for incorrect addresses, you are responsible for the address you write We are not responsible for the customs fees charged by your country, each country has its own law, please study the laws before purchase. Orders outside the United States For buyers located outside of the United States, additional fees and taxes may be collected at your destination in accordance with your country's rules. For more information, consult FEDEX and UPS carriers or CUSTOMS in your country before purchasing. WE ARE NOT RESPONSIBLE FOR CUSTOMS FEES CHARGED BY YOUR COUNTRY
Price: 269 USD
Location: sao paulo
End Time: 2024-09-25T00:06:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Taramp's
Model: HD3000.1 20ohms + TS400x4 + Pro 2.4S
MPN: NAO SE APLICA
RMS Power: 3000W
Country/Region of Manufacture: Brazil
Channels: Mono