T-3661 Maintenance Box for Epson XP-15000 XP-15010 XP-15080 maybe others

Description: May not work on XP-8XXX (8000-8005-8500-8505-8600-8605) - XP-6XXX (6000-6001-6005-6100-6105) due to a chip incompatibility. You can try it and return it if it doesn't. Or just buy a CHIP which MAY work on the above models. This replaces your existing maintenance waste tank when it reaches a point of saying it is full. Epson seems to be out of stock on them a lot but then add on tax and shipping and the time it takes to come from Epson and this solution looks much easier. If your Epson printer uses a T-3661 waste tank, this will easily slide into place. It will show as NEW and you will have a whole new ink cycle. This works on the XP-15000 XP-15010 XP-15080 and also possibly on the list below. This can be "opened up" to check on and possibly give maintenance to the sponge inside in order to extend it's life. * NEW * - I just put some T-3661 chip resetters up on another auction. I have "chips" available too. These are all NEW. - ** FREE SHIPPING for USA Buyers** Works with the below and any others I may have missed if your printer uses a T-3661 maintenance tank. Printers that accept this Epson T3661 maintenance tankEpson Expression Photo HD XP-15000.Epson Expression Photo HD XP-15010.Epson Expression Photo HD XP-15080.----------------------------------------------------------------------------------------------------------------------------------------------------------------------Epson Expression Photo XP-8000. I have a report that this may not work on the XP-8XXX which might mean ALL XP-8XXXEpson Expression Photo XP-8005. - see aboveEpson Expression Photo XP-8500. - see aboveEpson Expression Photo XP-8505. - see aboveEpson Expression Photo XP-8600. - see aboveEpson Expression Photo XP-8605. - see aboveEpson Expression Photo XP-8606. - see aboveEpson Expression Photo XP-6000. - I have a report that this may not work on the XP-6000 which might mean ALL XP-6XXXEpson Expression Photo XP-6001. - see aboveEpson Expression Photo XP-6005. - see aboveEpson Expression Photo XP-6100. - see aboveEpson Expression Photo XP-6105. - see above Maintenance Tank materials sold in my store. Explanation of each item and why you would choose one over another. The components you will find that I sell for Epson/Canon photo printers are for these models of maintenance tanks Epson C9345 – Epson T3661 – Canon MCG02. These maintenance carts work for various printers. See the list of printers supported in each auction. Your maintenance tank starts to fill up with ink that is sent there for cleanings or deep cleanings or just because you haven’t printed in a while and your printer decided to do an ink purge cycle to keep its nozzles clear of dried ink. Purge cycles are a GOOD THING. I sell: 1. Compatible Maintenance Tanks themselves2. Chips that go onto the Maintenance Tank3. Resetter to “reset” the chips on the Maintenance Tank4. Inside sponge material that soaks up and holds the ink (think diapers) For most printers, once your maintenance tank fills up with ink, it will eventually not allow you to print anymore until you replace it. That’s what Epson/Canon wants you to believe. In reality, TESTS have shown that at this point, there is still plenty of space left in the tank to continue to run ink through it for sometimes 2 to 5 complete additional CYCLES of ink. You have options which I will spell out. 1. Maintenance Tank. – You can just buy a NEW compatible maintenance tank. Remove the old, put in the NEW (which has a NEW chip) which will show the tank as EMPTY, throw away the old tank. You’re done. Except you have added to the landfill a big heavy plastic box that will take 100 years to disintegrate. Believe me, that’s the easiest thing to do. And in most cases my compatible maintenance tanks are cheaper and quicker than buying one from Epson/Canon. But other alternatives are also available. 2. CHIPS. Your printer writes data to the CHIP on the maintenance tank ESTIMATING how much space you have left. If you buy a NEW chip and replace the old one, your printer will be fooled into thinking your tank is now EMPTY and will allow you to run another cycle of ink into it. This is a little tedious to get the chip in exactly the right spot and may benefit from a little glue to get it into exactly the right spot. But the cost for a chip is lower than any of the other options and will get you by if you don’t want to invest in a Resetter. In this case you can just buy a new CHIP every time the printer tells you the chip (tank) is full. 3. Resetter. This is a device which will allow you to RESET the data on the chip to fool your printer into thinking your tank is empty and will allow you to continue to print. Chips can be “reset” over and over and you will NEVER need to throw away your bulky plastic tank. But resetters are an expensive item as far as things in this list go. They are intended for the most hardcore print enthusiasts who print A LOT. Resetters use batteries or USB power to “glitch” the chip and RESET it back to an “empty” condition. They are meant to be used BEFORE the tank reaches 15% of space remaining in the tank. If you purchase a resetter, remember this. 4. Sponge Material. This soaks up the ink in the tank and keeps the tank from leaking the ink stored in the tank. At some point, after many cycles of ink entering the tank, it will get full. You don’t want to have ink leaking out inside your printer, so this is a solution. Tanks can be opened easily and the old pads removed and either replaced or rinsed out and dried. My sponge material is made to fit perfectly into the tanks. Remove old pads, throw away, rinse the tank in the sink, dry the tank, install new pads. Keep in mind that replacing the sponge pads DOES NOT affect the ink level being shown by the chip. If the chip is showing the tank is full, you will still need to either replace the chip or reset it. The sponge material is simply an item that will allow you to continue to use the tank and eliminate the need to “throw it away”. Think GREEN. These options will extend your printing capabilities for all of the Canon/Epson models used by these Maintenance Tanks. Choose what fits your needs and budget. We will be here for you to get them going and answer your questions.

Price: 15 USD

Location: Fremont, California

End Time: 2024-10-08T23:55:28.000Z

Shipping Cost: 0 USD