Cardinal

Subaru Outback and Legacy - i88 harness adapter and 14-pin for JDM HVAC Panel

Description: JDM HVAC Panel wiring adapter for Subaru Legacy and Outback Normal 0 false false false EN-US X-NONE X-NONE In Legacy/Outback models with automatic climate controls, HVAC controls are integrated with the factory radio. Removing the radio means you lose your factory HVAC controls so customers will use the JDM "A/V Panel Set" to provide a replacement HVAC control panel, along with a mounting kit to install an aftermarket double-DIN radio. However, the JDM HVAC panel requires Illumination and +12V Switched signals that are not present on the factory "i88" harness in US and Canadian Legacy/Outback models. This adapter is used in combination with the JDM AV Panel to retain HVAC control when installing an aftermarket Double DIN headunit in a Subaru Legacy or Outback. The JDM panel requires the following additional signals that are not connected in the OEM harness: Illumination (-) Illumination (+) +12V Switched This adapter is a plug-and-play solution to add these signals to the connector on your vehicle's wiring without cutting factory wire. The parts you'll need are the i88 adapter, which connects to the back of the JDM AC Panel and the vehicles i88 connector, and the 14-pin Subaru Install harness with the added Illumination (-) pin. This additional pin (also referred to as the 'Dimmer' signal) typically isn't installed in the this adapter if you purchase if from most online retailers. An installation diagram is not included but here are the wire colors for the 14-pin adapter: Red - 12V Ignition/ACC Yellow - 12V Battery/Memory Black - Ground Blue - Antenna/Amp turn-on Gray - Right Front + Gray/Black - Right Front - White - Left Front + White/Black - Left Front - Violet - Right Rear + Violet/Black - Right Rear - Green - Left Rear + Green/Black - Left Rear - For vehicles with steering wheel controls: If you have steering wheel controls, you'll need the i85 adapter to retain them. This adapter is available directly from AutoHarnessHouse. Fitment: Subaru 2005-2009 Legacy/Outback

Price: 70 USD

Location: Pittsburgh, Pennsylvania

End Time: 2024-08-17T07:23:37.000Z

Shipping Cost: 0 USD

Product Images

Subaru Outback and Legacy - i88 harness adapter and 14-pin for JDM HVAC PanelSubaru Outback and Legacy - i88 harness adapter and 14-pin for JDM HVAC PanelSubaru Outback and Legacy - i88 harness adapter and 14-pin for JDM HVAC Panel

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Manufacturer Part Number: AHH-JDM

Brand: AutoHarnessHouse.com

Recommended

Toyota Radio Retrofit Adapter - Entune 2.0 (pre-2019) to Entune 3.0 Carplay
Toyota Radio Retrofit Adapter - Entune 2.0 (pre-2019) to Entune 3.0 Carplay

$400.00

View Details
SUBARU LACGACY AND OUTBACK ADPT BACK UP UNIT PART# 82133AN00A
SUBARU LACGACY AND OUTBACK ADPT BACK UP UNIT PART# 82133AN00A

$15.99

View Details