Skilhunt H150

Description: Skilhunt H150 H150 AA 14500 USB magnetic charging LED Headlamp LED: CREE XP-L2 6500K / Nichia 519A High CRI R9080 4500K or 3000KMax output: CREE Cool White ANSI 650 Lumens, Nichia High CRI ANSI 480 LumensMax runtime: 55 daysMax beam distance:14500 : 92m (XP-L2 HD) / 95m (NVSW519AT)Ni-MH : 54m (XP-L2 HD) / 56m (NVSW519AT)Max peak beam intensity:14500 : 2100cd (XP-L2 HD) / 2250cd (NVSW519AT)Ni-MH : 730cd (XP-L2 HD) / 790cd (NVSW519AT)Waterproof: IPX-8Impact resistant: 1 MeterBattery: 1×14500 , 1x AARated Range: 0.8V ~ 4.2VDimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “.Weight: 33 g / 1.16 oz (without battery)Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Skilhunt H150 Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFFSingle click the side switch to turn the light on/off. When the light is turned off,it will memorized current brightness level or mode.2. CHANGE BRIGHTNESS LEVELWhen the flashlight was OFF status:Single click switch to Memory level(H-M1-M2).Quickly double clicks switch to Trubo(T1/T2).Quickly triple-click switch to Strobe(S1/S2/S3).Hold press switch 0.5 second to Low(L1/L2).When the flashlight was ON (T1/T2, H/M1/M2, L1/L2)Press and hold the switch to automatically cycle, the level is selected when the sideswitch has been released, turn off memorized.When the flashlight was ON Memory level(H/M1/M2)Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly doubleclicks switch back to Memory level.Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back toMemory level.Quickly click and hold switch tranfer Memory level to Low, repeat quickly click andhold switch back to Memory level.When the flashlight was ON Strobe(S1/S2/S3)Quickly double clicks switch tranfer S1-S2-S3, turn off memorized.3.LOCK-OUT FUNCTION & LOCATION INDICATORWhen the flashlight is off , quickly click switch 4 times to access the button lockoutmode (location indicator activation at same time,the indicator light flash every second.Double clicks can turn on/off the indicator). Quickly click switch 4 times,the buttonunlock and activate memory Low mode.4. LOW VOLTAGE INDICATORWhen the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time.When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source,then attach the other end of the cable to the charging port of the light(Recommeded USB power no less than 5W (5V 1A) )The red indicator means charging, when the battery charging completed,change to blue indicator.!!! Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery!When the battery is incorrectly insert the light,charging will damage the charging circuit. Skilhunt H150 Features 1.Super bright & latest LED, Max 650 lumens. High-Performance, High-Efficiency and energy conservation.2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.3.Built-in magnetic charging system, fast charge and convenient.4.Rugged indestructible aluminum body with anti-scratching type III hard anodization5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.6.Side switch button to transferring mode user-friendly interface to adjust output.7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.9.Intelligent temperature control technology for flashlight stable and safe use.10.Reverse polarity protection, to protect from improper battery installation.11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected.12.When light lockout, location indicator will flash, easy get the light in dark.13.Magnetic tail, can be used in many special occasions, use as candlelight, etc.14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals.Please do not cover the light head when the flashlight is on, or place the flashlight headon the ground. The radiation energy of the flashlight may cause damage to the flashlightitself, or even result in burning to other materials.Please do not use the turbo mode continuously when the environmental temperature ishigh in case the flashlight body is too hot to hold.Please do not put the light with magnetic items such as bank cards and mobile phones. Notice:Before operating this product, please read the enclosed User Manual completely.If the product is left unused or carried and transported, please lock the button or slightlyloosen the tail thread to avoid accidentally activating the flashlight.When the product is used in a low-temperature environment, please try and keep it warm.If the temperature is too cold, it may not affect the output and runtime. H150 AA 14500 USB magnetic charging LED Headlamp LED: CREE XP-L2 6500K / Nichia 519A High CRI R9080 4500KMax output: CREE Cool White ANSI 650 Lumens, Nichia High CRI ANSI 480 LumensMax runtime: 55 daysMax beam distance:14500 : 92m (XP-L2 HD) / 95m (NVSW519AT)Ni-MH : 54m (XP-L2 HD) / 56m (NVSW519AT)Max peak beam intensity:14500 : 2100cd (XP-L2 HD) / 2250cd (NVSW519AT)Ni-MH : 730cd (XP-L2 HD) / 790cd (NVSW519AT)Waterproof: IPX-8Impact resistant: 1 MeterBattery: 1×14500 , 1x AARated Range: 0.8V ~ 4.2VDimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “.Weight: 33 g / 1.16 oz (without battery)Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Skilhunt H150 H150 AA 14500 USB magnetic charging LED Headlamp LED: CREE XP-L2 6500K / Nichia 519A High CRI R9080 4500K or 3000KMax output: CREE Cool White ANSI 650 Lumens, Nichia High CRI ANSI 480 LumensMax runtime: 55 daysMax beam distance:14500 : 92m (XP-L2 HD) / 95m (NVSW519AT)Ni-MH : 54m (XP-L2 HD) / 56m (NVSW519AT)Max peak beam intensity:14500 : 2100cd (XP-L2 HD) / 2250cd (NVSW519AT)Ni-MH : 730cd (XP-L2 HD) / 790cd (NVSW519AT)Waterproof: IPX-8Impact resistant: 1 MeterBattery: 1×14500 , 1x AARated Range: 0.8V ~ 4.2VDimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “.Weight: 33 g / 1.16 oz (without battery)Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Skilhunt H150 Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFFSingle click the side switch to turn the light on/off. When the light is turned off,it will memorized current brightness level or mode.2. CHANGE BRIGHTNESS LEVELWhen the flashlight was OFF status:Single click switch to Memory level(H-M1-M2).Quickly double clicks switch to Trubo(T1/T2).Quickly triple-click switch to Strobe(S1/S2/S3).Hold press switch 0.5 second to Low(L1/L2).When the flashlight was ON (T1/T2, H/M1/M2, L1/L2)Press and hold the switch to automatically cycle, the level is selected when the sideswitch has been released, turn off memorized.When the flashlight was ON Memory level(H/M1/M2)Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly doubleclicks switch back to Memory level.Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back toMemory level.Quickly click and hold switch tranfer Memory level to Low, repeat quickly click andhold switch back to Memory level.When the flashlight was ON Strobe(S1/S2/S3)Quickly double clicks switch tranfer S1-S2-S3, turn off memorized.3.LOCK-OUT FUNCTION & LOCATION INDICATORWhen the flashlight is off , quickly click switch 4 times to access the button lockoutmode (location indicator activation at same time,the indicator light flash every second.Double clicks can turn on/off the indicator). Quickly click switch 4 times,the buttonunlock and activate memory Low mode.4. LOW VOLTAGE INDICATORWhen the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time.When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source,then attach the other end of the cable to the charging port of the light(Recommeded USB power no less than 5W (5V 1A) )The red indicator means charging, when the battery charging completed,change to blue indicator.!!! Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery!When the battery is incorrectly insert the light,charging will damage the charging circuit. Skilhunt H150 Features 1.Super bright & latest LED, Max 650 lumens. High-Performance, High-Efficiency and energy conservation.2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.3.Built-in magnetic charging system, fast charge and convenient.4.Rugged indestructible aluminum body with anti-scratching type III hard anodization5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.6.Side switch button to transferring mode user-friendly interface to adjust output.7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.8.Automatic memory function, remember last uséd setting and can be preset to specific output mode for instant access.9.Intelligent temperature control technology for flashlight stable and safe use.10.Reverse polarity protection, to protect from improper battery installation.11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected.12.When light lockout, location indicator will flash, easy get the light in dark.13.Magnetic tail, can be uséd in many special occasions, use as candlelight, etc.14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals.Please do not cover the light head when the flashlight is on, or place the flashlight headon the ground. The radiation energy of the flashlight may cause damage to the flashlightitself, or even result in burning to other materials.Please do not use the turbo mode continuously when the environmental temperature ishigh in case the flashlight body is too hot to hold.Please do not put the light with magnetic items such as bank cards and mobile phones. Notice:Before operating this product, please read the enclosed User Manual completely.If the product is left unuséd or carried and transported, please lock the button or slightlyloosen the tail thread to avoid accidentally activating the flashlight.When the product is uséd in a low-temperature environment, please try and keep it warm.If the temperature is too cold, it may not affect the output and runtime. H150 AA 14500 USB magnetic charging LED Headlamp LED: CREE XP-L2 6500K / Nichia 519A High CRI R9080 4500KMax output: CREE Cool White ANSI 650 Lumens, Nichia High CRI ANSI 480 LumensMax runtime: 55 daysMax beam distance:14500 : 92m (XP-L2 HD) / 95m (NVSW519AT)Ni-MH : 54m (XP-L2 HD) / 56m (NVSW519AT)Max peak beam intensity:14500 : 2100cd (XP-L2 HD) / 2250cd (NVSW519AT)Ni-MH : 730cd (XP-L2 HD) / 790cd (NVSW519AT)Waterproof: IPX-8Impact resistant: 1 MeterBattery: 1×14500 , 1x AARated Range: 0.8V ~ 4.2VDimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “.Weight: 33 g / 1.16 oz (without battery)Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . × × × × × × × × × × × × × × × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Fenix HM65R Fenix PD25 Fenix PD36R Lumintop FW3A Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Killzone Flashlights Shipping & Payments Click the Shipping & Payments tab above the listing description for more info eBay integration by

Price: 53.9 USD

Location: Kingwood, Texas

End Time: 2023-11-21T03:57:59.000Z

Shipping Cost: 6.95 USD