SF-HC25K THC Plasma Cnc Cutting Machine Automatic Arc Cap Voltage SF-HC25G

Description: SF-HC25G has been upgraded to SF-HC25K, which has same functions and wirings, only the operation panel is much bigger. And price is the same. The SF-HC25G/SF-HC25K Plasma Torch Height Controller is a torch height automatic control module specifically designed for portable plasma cutting machines. The SF-HC25G /SF-HC25K plasma torch height controller is easy to operate, easy to debug, affordable, and fully digitally controlled for reliable performance. It is an ideal accessory product for welding and cutting equipment manufacturers. The main unit and panel split structure make it ideal for portable cutting machines. Important statement There may be some differences between the physical and manual contents of the SF-HC25G /SF-HC25K plasma torch height controller. Please refer to the actual product. Be sure to read the safety warnings and precautions to avoid dangerous use due to improper use. Before using this product, you must follow the detailed instructions in the system manual to ensure proper use of the product. Safety warnings are used to prevent injury to humans and property. The installer must be a relevant industry or a technician with relevant experience. This manual must be read in detail before installation. Verify that the selected power supply matches the specifications you require. It is strictly forbidden to install or plug in and pull out the plug when the power is on. Install the location as far away as possible from the heat source. The controller enclosure must be well grounded to prevent electrical shock or to affect controller operation. The steel to be cut must be well grounded and maintain a good connection to the controller casing to ensure the accuracy of the height control. Please handle it carefully. Do not collide or vibrate strongly to avoid damage to the product. Do not disassemble the torch height controller or change its internal structure to prevent accidents or malfunctions. Technical characteristics 1. This product adopts 32-bit arm as the core and two sets of 3-digit digital tube displays, which adopt digital control mode. The linear adjustment device is not included inside, which greatly improves stability. 2. The speed parameters can be modified, and can be modified arbitrarily according to the power supply and lifting mechanism. 3. The circuit adopts the chip technology, there is no adjustable device inside, and the full digital control technology ensures the high reliability of the product. 4. The operation is simple, and the two sets of digital tubes respectively display the set arc voltage and the actual arc voltage, which are simple and intuitive. There are 3 knobs for setting parameter operations. 5. Simple and convenient interface, suitable for all plasma cutting CNC systems, can also be used alone. 6. Adopt the proximity positioning mode of the proximity switch. 7.Pwm output, 255 speed adjustable, precise control of motor speed, multi-speed current setting, short circuit protection. 8. The anti-collision function of the cutting tool, when the cutting nozzle touches the steel plate, the controller will quickly lift the cutting tool a certain distance to effectively protect the cutting nozzle. 9. All input and output are opto-isolated, plasma voltage feedback adopts linear opto-isolation, independent isolated power supply, and can be very compatible with imported plasma power supply of each brand with its own voltage divider. 10. Integrated arc start success judgment function, arc start success feedback function. Technical indicators Power requirements: DC24V ± 10% 3 A / 50Hz Applicable motor: 24V DC brush motor Drive mode: PWM Output current: Initial positioning mode: proximity switch or mechanical switch (normally open normally closed through jumper cap setting) Maximum control accuracy: ±1V Box size: host 145X90X42 Panel: 120X55X40 Working environment temperature: -10 ~ 60 ° C Weight: 0.6Kg Detection system: isolated arc voltage divider SF-HC25G/SF-HC25K arc voltage height controller has no special port. Four wires are required from the voltage divider of the SF-HC25G/SF-HC25K height adjuster and the plasma power connection. The two wires are at the port where the plasma starts to arc, and the plasma cutter will have it. The arc voltage signal is two lines divided into positive and negative poles. If the plasma power supply does not have a dedicated port, the plasma power supply housing needs to be opened and connected from the secondary rectification inside the plasma power supply, which is the original arc voltage of the plasma power supply. You only need to connect the ground wire because the interference from the plasma power supply is too large. The ground wire needs to use a copper rod with a diameter of 50mm or two angle steels with a length of 2 meters. Go underground. Connect to the housing of the plasma power supply.

Price: 135 USD

Location: china

End Time: 2025-01-11T07:13:26.000Z

Shipping Cost: 6 USD