Rebaydo™ LED Third Brake Light 17" 6 Volt AC or DC Dual Filament

Description: Rebaydo™ LED Third Brake Light 17" 6 Volt Non Polarity Dual Filament. Works either positive ground or negative ground. This third brake light has both taillight and brake light. The lens is marked with SAE, STI and DOT. Long life up to 30,000 hours. The back is encapsulated with black epoxy. The lens is made from PC. The black wire is ground. The white wire is for taillight. The red wire is for brake light. The Red color taillight uses approximately 76mA at 6.04 volts. The Red color brake light uses approximately 520mA at 6.04 volts. The Yellow/Amber color taillight uses approximately 70mA at 6.04 volts. The Yellow/Amber color brake light uses approximately 475mA at 6.04 volts. The The third brake is non polarity. The light has 9 super bright led's that are behind a lens. The overall length is 17.25". The width is 1.1165". The wire length is approximately 7" long. The wires come out of the center on the back side of the third brake light. Available colors are Red and Yellow/Amber. If the color attribute is not shown it means that we are out of stock of that color and takes about 4 to 8 weeks to restock. There are two mounting holes. Each mounting hole is at the end of the third brake light. You could use just the taillight or you could use the brake light. The lens color is Yellow for Yellow/Amber. The lens color is Red for Red. Each third brake light is tested before shipping. One year warranty from date of purchase. Comes one in the package.

Price: 29.99 USD

Location: Phoenix, Arizona

End Time: 2024-12-08T19:45:32.000Z

Shipping Cost: 7.49 USD