Printed Vinyl, Purple Leopard Print Patterned HTV & Adhesive Vinyl Sticker Decal

Description: Available in heat transfer vinyl HTV, permanent adhesive (sign) craft vinyl & reusable no residue adhesive vinyl & decal (Apply, Remove, Apply Again No Residue)Tons of patterns & options! Contact us if you'd like to make a special request or custom pattern!Contact us with any questions or requests!Professionally Printed Pattern Vinyl for HTV & Craft VinylHigh-quality pattern vinyl3 Options to choose from:• Siser Colorprint Easy Iron On Heat Transfer Vinyl• Patterned Oracal 651 Glossy Permanent Adhesive Craft Vinyl - Indoor/Outdoor Use• Reusable No Residue Adhesive Vinyl - Applies to any CLEAN/SMOOTH Hard Surface - Apply, Remove, Apply Again No ResidueIndoor/Outdoor UseBundle discounts available!Cut out any shape or design & apply!Take advantage of our huge selection of patterns & colors!Please be sure to check out the easy application instructions below!All you need is a plotter or cutter! *Iron for HTV*All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks.Permanent Adhesive Craft Vinyl (Outdoor/Indoor Vinyl)Printable Oracal 651 - No Transfer Tape Provided• Great to use on glass, metal, plastic, and much more! Please clean surface before use!• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a• transfer tape to transfer design off of the backing and place on your smooth & clean surface• Weatherproof / 4+ years durabilityReusable No Residue Adhesive Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Apply, Remove & Apply Again! No Residue!Comparable to 3M - No Transfer Tape Provided• Great to use on glass, metal, plastic, and much more! Please clean surface before use!• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, peel and apply (Recommended to be cut as a single piece or design)• transfer tape to transfer design off of the backing and place on your smooth & clean surface• Weatherproof / 7+ years durabilityIron on Heat Transfer Vinyl - For Any Garment or FabricPrinted on Siser ColorPrint Easy (TTD High-Tack Mask Provided)Heat Transfer is printed without the carrier. Siser TTD Easy Mask is providedfor application• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply• TTD Easy Mask to transfer design off of the backing and place on your garment face up• Can be applied with a home iron and/or heat pressCUTTER SETTINGSCricut: Blade: Standard Setting: Iron OnSilhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/sGraphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/sSettings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs.APPLICATION INSTRUCTIONSApplication Instructions (home iron)Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier hot or coldApplication Instructions (heat press)Cut material - don't mirror! Weed excess material Mask with TTD High Tack Mask Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds Peel carrier hot or cold Cover and reheat for 2-3 secondsRECOMMENDED ACCESSORIES & CAREPatterned Vinyl Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandexRecommended Accessories: Weeder/TweezersLaundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleachHOW TO APPLYHTV 1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel mask 5) PressCraft Vinyl 1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel maskCUSTOM PATTERNS AND DESIGNSHave your own patterns you want to print?Contact us today!

Price: 3.33 USD

Location: Brea, California

End Time: 2024-08-25T12:46:50.000Z

Shipping Cost: 0 USD