PATHWAY DMX REPEATER PRO 9116 . NEW PATHWAY CONNECTIVITY SOLUTION.

Description: PATHWAY DMX REPEATER PRO 9116. NEW. PATHWAY CONNECTIVITY SOLUTION. NEW. RDM/DMX Repeater Pro [9114, 9115, 9116, 9117, 9118]An intelligent opto-splitter that brings Ethernet-type features to plain DMX networks.An increasingly important part of DMX data distribution systems, the Repeater Pro's support for RDM (Remote Device Management) allows the Repeater Pro to act as an RDM Controller, or a bidirectional RDM splitter.In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating the need for patch bays.The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam—ideal for incorporating remote focus units.FeaturesSpecificationsCompliancePhysicalTips & TricksSilent operation8 outputsE1.20 RDM and E1.11 DMX512A compliantThree modes: RDM, Merge, and HubRDM discovery and end device management from the front panelRDM can be disabled on a port-by-port basis to accommodate older equipmentMerge two controllers without any additional gearAutomatically switch a console between locations by simply unplugging and replugging the consoleUnits running in different modes can be chained togetherFully configurable from the front displayDMX output speed and signal loss behavior are user-selectable, including hold foreverMonitor incoming DMX signal levels in real timeDMX Console sends a channel level to all ports, for an independent DMX signal check on end devicesSelf-resetting over-voltage protection on all portsShips with rack earsModelsDescription9114DMX Repeater Pro, 8-way, Rear XLR5, Fully Isolated9115DMX Repeater Pro, 8-way, Rear Terminal, Fully Isolated9116DMX Repeater Pro, 8-way, Front XLR5, Fully Isolated9117DMX Repeater Pro, 8-way, Rear RJ45 Ethercon, Fully Isolated9118DMX Repeater Pro, 8-way, Front RJ45 Ethercon, Fully IsolatedAccessories9002Wall mount kit9003Truss mount kitPRODUCT OVERVIEW SPECIFICATIONS An intelligent opto-splitter that brings Ethernet-type features to plain DMX networks. RDM (Remote Device Management) support allows the Repeater Pro to act as an RDM Controller, or as a proxy. In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating the need for patch bays. The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam—ideal for incorporating remote focus units.  85-250VAC 50/60 Hz wide-ranging power input  Operating Conditions: -10 to +50°C, 5-95% relative humidity, non-condensing  0.75A power consumption  2500V opto-isolation between all ports  250V fault protection per port FEATURES  Silent operation  8 outputs  E1.20 RDM and E1.11 DMX512A compliant  Three modes: RDM, Merge, and Hub  RDM discovery and end device management from the front panel  RDM can be disabled on a port-by-port basis to accommodate older equipment  Merge two controllers without any additional gear  Automatically switch a console between locations by simply unplugging and replugging the console  Units running in different modes can be chained together  Fully configurable from the front display  DMX output speed and signal loss behavior are userselectable, including hold forever  Monitor incoming DMX signal levels in real time  DMX Console sends a channel level to all ports, for an independent DMX signal check on end devices  Self-resetting over-voltage protection on all ports  Racxk ears included STANDARDS COMPLIANCE  ETL  CE  RoHS 2002/95/EC  E1.20 RDM R2010—

Price: 1500 USD

Location: Brooklyn, New York

End Time: 2024-02-16T02:47:12.000Z

Shipping Cost: N/A USD