OKTIS 2 Octane Tester Portable Fuel Analyzer Gasoline Petrol Number Meter ENGver

Description: OKTIS 2 Octane Tester Portable Fuel Analyzer Gasoline Petrol Octane Number Meter ENGLISH Version!!! The device for measuring the octane number Oktis-2 Portable device for determining the quality of gasoline grades A-80, A-90, A-92, A-93, A-95. The measurement of the octane number can be carried out both in the flow mode (for example, during refueling through the measuring tube of the device), and by immersion. Preparation for testing will take no more than 15 seconds, it will take a few more seconds to measure and display the result, so in less than a minute you will find out whether it is worth refueling at a particular gas station! Checking the quality of gasoline grades A-80, A-90, A-92, A-93, A-95 The minimum octane number that the OKTIS-2 indicator “captures” is 75, and the maximum numerical value is 100. Thus, using this device, you can objectively check the quality of the most common brands of gasoline A-80, A-90, A- 92, A-93, A-95. Efficiency of measurements It will take no more than 15 seconds to prepare the device for testing. The result of the octane measurement will be displayed in a matter of seconds. Two ways to take measurements Flow and immersion method. For in-line measurement, at least 5 liters of fuel are required, for submersible - at least 80 ml. Compact size and light weight The octanemeter device has compact dimensions and light weight, which makes its transportation quite simple and convenient. Easy to operate and maintain Measurements do not require special technical knowledge. The meter tester does not require service. It is possible to calibrate the device for a specific region. __________________________________________ Device and principle of operation The octane analyzer is made as a single device that includes three main units. The octanometer has a housing consisting of a compartment with an electrical part and a transitional compartment with sealing rings, to which a measuring tube with a sensitive element is fixed. The transition chamber and the measuring tube form a channel in which gasoline is located or flows. The compartment with the electronic part contains a digital display and batteries. The fuel check is carried out when gasoline hits the sensitive element in the tube (sensor), the parameters of the element change, the microprocessor compares them with the data stored in the memory, and measurement figures corresponding to the octane number of gasoline appear on the digital display. The tester device is turned on by pressing it once until it locks on the “ON / OFF” button. Pressing this button again turns off the device. __________________________ What is it needed for The portable meter is designed to determine the octane number of automobile gasoline grades AI-80, AI-92, AI-95, AI-98, and gives the car owner primary information about the quality of gasoline. It can serve as a household hydrometer for measuring the quality of fuel in cars or an octane meter. At the same time, the OKTIS 2 detector is NOT INTENDED to be used as a measuring tool in case of disputes regarding the quality of gasoline at gas stations! Specifications Range of determined octane numbers - from 75 to 99.9. The minimum amount of gasoline required to determine the octane number in flow mode is from 2 to 5 liters. The minimum volume of gasoline required to determine the octane number in dive mode is 80 ml. Time of preparation of the device for work - no more than 15 seconds. Power supply - 2 AA batteries. (may be absent due to customs requirements) The current consumed from batteries - no more than 80mA. Temperature of tested gasoline - from 0 to +40°C. Ambient temperature - from -10 to +40 °C. Humidity at 30°С - from 30 to 80%. Product weight - no more than 0.36kg. Package dimensions and weight - 33 x 16 x 5 cm, 0.6 kg. Equipment Octane number indicator for motor gasoline OKTIS-2 - 1 pc. Set of spare seals - 1 pc. AA batteries - 2 pcs. (may be absent due to customs requirements) Instructions(RUS) for use and removal of contaminants - 1 pc. Branded packaging - 1 pc. English manual upon request via mail English User’s Manual can be provided via email (please ask for in message). Note: Items cost does NOT include Charges, Taxes and Import Duties. Byuer pays all these fees. SHIPPING: All packages are sent from Belarus by the registered air mail(tracknumber) and it usually takes from 10 to 30 days(Europe and US) depending on country of destination(other countries may up to 45days). Please note, due to holidays and custom clearance delivery may be delayed. If You have any questions or problems, please contact us!We will make sure that everything is the way it should be with the process.We will make sure that you will have a great experience shopping with us! If so, We expect You to leave a positive feedback and be sure that you will receive a positive feedback as well. Please, do not leave a negative feedback before you contact us! If there are any problems, we will make it our number one priority to make sure you are happy.

Price: 184.45 USD

Location: Minsk

End Time: 2024-11-12T17:04:50.000Z

Shipping Cost: 29.9 USD