New Rees, Inc. 04953-111 Cable Operated Switch S/E RH 1NO/1NC

Description: Rees Cable Operated Switch Single Flag on right -#25 Trip Force Maintained Contacts - Type 4X(Cable Switch S/E RH 1NO/1NC)New, open box Please see pictures for details Per the Manufacturer Features/Applications The following “slack cable” style switch has 1 NO and 1 NC contact. This switch is particularly competent for use in Emergency Stop applications as well as for ordinary circuit control. The housing is made from high quality die-cast aluminum and powder coated painted yellow. The independently operating red indicating flag rotates 90 degrees when tripped. Manually returning the flag to its normal position resets the switch. · Manual reset with “Positive Break” contacts · Gold plated contacts eliminate high resistance tarnishing · Right Hand Pull · Nema 4X (indoor), IP 66 Each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation. For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540. There are two ½” NPT conduit openings. The maximum cable recommended cable length is 200 feet with a maximum interval support of 10 feet. The mechanical life of the switch is 150,000 operations. This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping. The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments. Electrical Ratings “HEAVY DUTY – A600 / N150” Listed under UL 508 – File # E 58589 Certified under CSA C22.2 – File # LR 3648 CE Compliant IEC/EN 60947-5-1 Environmental Temperature Range Operating: +32oF to +131oF (0oC to +55oC) Storage: -40oF to +185oF (-40oC to +85oC) Note: Operating temperatures at 0oC are based on the absence of freezing moisture and liquids. WARNING - DANGER These products should only be used where point-of-operation guarding devices have been properly installed & maintained so that appropriate OSHA and ANSI B11.1 regulations & standards are met. Misapplication of the products on machinery lacking effective point-of operation safeguards can cause serious injury to the operator of that machinery.

Price: 700 USD

Location: Carpinteria, California

End Time: 2024-12-11T08:17:46.000Z

Shipping Cost: N/A USD