New* Oval 500 Crank Arm Set Compact 110 BCD 170 mm Praxis M30 Road 68 (30/28)

Description: For sale is one new, open-stock*: Oval 500 Compact Double Crank Arm Set, 170mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); Traditional 5-arm 110 BCD. *Note: This crank arm set does not come in retail packaging; it has faint handling wear but has never been used. Shown is a stock image. This crank arm set shows minor evidence of surface wear from open-box storage. It has never been driven. Product is functionally excellent. These cranks are suitable for Praxis M30 bottom brackets, which have a step-down 'GXP style' 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Oval 500 are good, stiff, mid-entry level cranks manufactured for Fuji and Kestrel bikes. Specifications 170mm Arm~152.5mm Q FactorTraditional 5-Arm 110 BCDFor 9/16 axle pedals M30 AL Spindle – 30mm with 28mm step-downRequires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive)Self-extracting bolt system8mm hex boltMade from AluminumApproximate weight: 20.9 ounces; 593 grams (taken from 172.5mm set; +/-.10 ounce) Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you're replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and spindle only; chainrings, chainring bolts, wave washer, etc. are not included. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service. If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap. I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Shipping: Your cranks shall be carefully packaged and shipped immediately after payment is received with insurance included free from additional charge. I ship the same day of payment (depending on when it is received). Please expect about 3-5 days for arrival. Shipping to PO Box, Hawaii, Alaska, and Protectorates not available for this item. That's it! I know that the buyer shall be most pleased. Do feel free to contact me if you have any questions or concerns. Thank you so much for looking! All original content copyright September I MMXVI by Blodwulf.

Price: 99.95 USD

Location: Ridgecrest, California

End Time: 2024-12-17T22:29:17.000Z

Shipping Cost: 0 USD