Description: CLEAR ARCHERY INC.Proudly serving your archery needs online for over two decades! Unfortunately, I am no longer able to place a phone number here in my listings as per eBay's policies so that we can discuss your purchases by phone. This drastically cuts into my ability to provide the best customer service possible, as I have done for so long here and through my own online storefront. This though is the new eBay policy, and there is nothing that I am able to do about this. I will still though do everything that I can to assure that your receive the bow package you are most interested in, set up in a way that best suits you, while providing the best customer service possible despite the limitations eBay has chosen to place on everyone. New, CustomLoadedLEFT HandedMathews Phase 4 / 33 inchBow Packagein Granite and Black Finish This bow is part of a left over inventory from a shop that I just purchased out. It has never been sold, never shot, never used in any way. Custom 2 color combo bows are an additional $100 at the time of new bow purchase, and definitely set them apart from others you will see. I have only the bows you see listed to offer, no others. I will work with you on putting together a package that is of most interest to you, and any bare bow pricing will be listed at the bottom of the description. Bow Specifics: - approximately 33" axle to axle- 6.5" brace height- up to 336 fps IBO- 4.68 lbs (bare bow only) Here are the specifics -LEFT Handed -Currently the bow is set up with 28.5 inch, 85% letoff, 70 pound modules (actually topping out at just over 72 pounds on my scale). The draw length and draw weight can be changed by changing the mods on the bow. This bow can be set up anywhere from 27 through 31.5 inches in draw length in either 80% or 85% when the correct draw modules are installed. Those modules are also available in 60, 65, 70 or 75 pound max draw weights. Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely). I have modules in 85% in stock to set this bow at the following: In 75 pound: 31.5, 31, 30.5, 30, 29.5, 29, 28.5, 28 In 70 pound: 31.5, 31, 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27 In 65 pound: 31.5, 31, 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27 In 60 pound: 31.5, 31, 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27 I have a limited number of sets in 80% as well. Please inquire about those prior to making a purchase if it is 80% modules you are interested in. ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price. If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included. -The limbs are in Factory Black finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed. Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively. -The riser of the bow is in Factory Granite finish. -This bow has the Mathews Engage grip. They are a great improvement over those before it. -The string is the original factory set of Zebra Trophy. They are in perfect condition as they have never been set up nor shot, but I can do that for you at no additional cost if you would like me to do so. -No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot. -No string loop has yet been installed, but I can do that for you if you would like for me to do so. Please just let me know that you would like a string loop installed prior to shipment and I will be sure that one is installed and ready to shoot at no additional cost to you. -The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration. I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well. - The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well. I have some other stabilizers as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well. -The rest is a Brand New QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot. MSRP on the rest when new is $150. I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want. -12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes. Again, these are 100 percent brand new, unshot, uncut arrows. I have several other arrow options available as well. Each option will be factory fletched in different colors. * If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow. The arrows I have in stock and pricing difference is as follows: *GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing. *Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.Arrow upgrades available are as follows: *Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow. *Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows. *Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows. *Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows. *GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows. *GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen--- -Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in Black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached. If you are looking for something different in a quiver please just let me know as I have many others around, and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well. -New Mathews Hat, Mathews Owner's manual and Mathews decals are included. ****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here****** I am not interested in selling the bare bow only, but if you would like to make an offer please message that to me for consideration. SHIPPING If you are within the Continental US, the bow will be shipped by FedEx, insured for the full purchase amount, with signature confirmation upon delivery and a tracking number sent to you once it is on its way. If you are in Alaska or Hawaii, the bow must be shipped by USPS mail (unless you wish to pay the additional charges that FedEx will place on any shipment- they are usually quite high). Shipping is to the United States only. I do not wish to sell or ship outside of the United States. Thank you,Tom Clear Clear Archery Inc.
Price: 1699.99 USD
Location: Erie, Pennsylvania
End Time: 2024-11-30T14:18:28.000Z
Shipping Cost: 50 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Non-Domestic Product: No
Brand: Mathews
Dexterity: LEFT Handed
Overall Length (in.): approximately 33 inches axle to axle
Draw Length (in.): Please see item description
Custom Bundle: No
Color: Granite and Black
Model: Phase 4 in 33 inch
MPN: Does Not Apply
Draw Weight (lbs.): Please see item description
Modified Item: No