*NEW* FSP GROUP 150W 12V Power DIN 4 Pin C14 FSP150-AHAN3 Laptop Power Adapter

Description: This auction is for 1 PC - FSP GROUP 150W 12V Slim Power Adapter Condition+ New+ OEM Package Specification This product is an 150 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems, etc. that have a high wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55032, EN55024 and FCC class B emission limits, and is designed for ITE application Meet IEC 62368 & IEC 60950Meet Code of Conduct Version 5 Tier 2High ReliabilityEMC Standard: EN55032 / EN55024 Class BOver Current ProtectionOver Temperature ProtectionOver Voltage ProtectionWith PFC Circuit INPUT SPECIFICATIONSInput voltage: 90-264 VACInput frequency: 47-63 HzInput current: 100Vac, 240Vac / full load ≦ 1.2ANo load power consumption: 115Vac , 230Vac ≦ 0.5WTouch current: 264Vac / 50Hz ≦ 0.25mA INPUT SPECIFICATIONSPower factor: 115Vac, 230Vac / full load ≧ 0.9 Provisions for adding harmonic reduction per EN 61000-3-2 must be present.Efficiency: DOE Level VIPower turn-on time: At 100Vac / full load, output voltage shall remain regulation ≦ 3SecHold-up time: At 100Vac or 240Vac / full load, output voltage shall remain regulation ≧10msInrush current: 100Vac, 240Vac / full load , Shall be less than the rating of adapter critical component (including rectifiers, fuse surge and current limiting device)Operating altitude: 5000 meters above sea level Withstand voltage: Between AC input and secondary applied DC 4242V,test time 1 minute, cut off current shall be less than 10mAMTBF: 100Vac, 240Vac / full load, 300,000 hours at 25℃, standard SR332EMC Performance: EN55032 Class B conducted, class B radiated FCC Class B conducted, class B radiatedVCCI Class B conducted, class B radiatedEN61000-3-2 Meet class DEN61000-3-3 Meet regulation EN61000-4-2 Air discharge: ±15 KV,contact discharge: ±8KV, meet criterion AEN61000-4-3 80 ~1000 MHz,3V/m,80% AM(1kHz), meet criterion AEN61000-4-4 Impulse: ±1kV applied to L,N,meet criterion AEN61000-4-5 ±1kV applied differential mode, ±2kV applied common mode,meet criterion AEN61000-4-6 0.15 ~ 80 MHz,3Vrms,80% AM(1kHz),meet criterion AEN61000-4-8 50 Hz or 60Hz,1A/m,meet criterion AEN61000-4-11 Voltage Dips： >95% reduction for 0.5 period,meet criterion B 30% reduction for 25 period,meet criterion C Voltage Interruptions： >95% reduction for 250 period,meet criterion CPower de-rating: 100Vac or 240Vac, 0℃ to 40℃, 100% load, 50℃, 85% load, 60℃, 70% load, 70℃, 55% load OUTPUT SPECIFICATIONS Output voltage/current: 12V/ 12.5ATotal output power: 150WProtection Over voltage: The adapter will enter into shut down that means no output while over voltage happened at output terminal that caused by internal fault, the output trip voltage shall not exceed 12 volts. That will be return to normal state by AC reset. Short circuit & Over current: When an internal fault occurs, or an external fault is applied to the power supply, such that an overload or short circuit is applied to the output, the power supply shall shut down and enter auto-recovery mode. Over temperature: The power supply will enter into shut down while the abnormal thermal rise occurs. That will be return to normal state by AC reset. Brown-out Set at 60Vac~70VacEnvironment Working TEMP.: 0~70℃ (> 40℃ de-rating ) Storage TEMP.: -20~+80℃ Working Humidity: 20~80% RH non-condensing Storage Humidity: 10~90% RH non-condensing BrandFSP GROUPModelFSP150-ABAN3AC Plug3-Prong C14DC JackPower DIN 4 PinAC Input100-240V, ~2A, 50-60HzDC Output12V, 12.5A. Total: 150W

Price: 44.99 USD

Location: Las Vegas, Nevada

End Time: 2024-04-22T07:18:28.000Z

Shipping Cost: N/A USD