NETSYS NVF-800S VDSL IP DSLAM

Description: The VDSL switch serves as a master modem to operate multiple slave VDSL modems (NVF-200R).General DescriptionThe NVF-800S is a VDSL IP DSLAM that aggregates 8 lines of 4-band Very-High-Data-Rate Digital Subscriber Line (VDSL) into Giga Ethernet uplinks for high-speed data/Internet services. Based on QAM-based 4-band VDSL technologies, NVF-800S extends data service with line rate of solution for . services such as remote lecturing, telemedicine, video conferencing, Video-on-Demand (VoD), IP-TV etc. Internet access, and other various high-speed data applications.The NVF-800S is a VDSL IP DSLAM that aggregates 8 lines of 4-band Very-High-Data-Rate Digital Subscriber Line (VDSL) into Giga Ethernet uplinks for high-speed data/Internet services. Based on QAM-based 4-band VDSL technologies, NVF-800S extends data service with line rate of solution for . services such as remote lecturing, telemedicine, video conferencing, Video-on-Demand (VoD), IP-TV etc. Internet access, and other various high-speed data applications.When the number of subscribers increases, the second uplink fast Ethernet interface can be used to daisy chain to another NVF-800S. Alternatively, multiple NVF-800S can be connected to another LAN switch to form a two-tier configuration, thus supporting a lot more subscribers. The NVF-800S is an ideal solution for delivering costeffective, high-performance broadband/multimedia services to Multi-Tenant Units (MTUs) or Multi-Dwelling Units (MDUs) such as hotels, campus, hospitals and telecom.Key Features & BenefitsCompliant with IEEE 802.3 & 802.3u & 802.3ab Ethernet StandardsCompliant with ETSI, ITU, ANSI standardsSupports 5M/15M/25Mbps per port symmetrical bandwidth over phone wiring with long driver capable1.7/1.1/0.6Km(5577/3609/1968 feet).Provides 2 x 10/100/1000Mbps Ethernet RJ-45 Ports with Auto MDI/MDIXSupports quality of phone wiring detected with SNR(Signal to Noise Ratio) indicationsSupports GARP/GVRP IEEE-802.1p/q VLAN with 256 groups static Vid or 4094 groups dynamic VidFlow control method by IEEE802.3x for Full Duplex & Back Pressure for Half DuplexCompliant with IEEE 802.1v protocol-base VLAN classificationCompliant with IEEE 802.1p COS by class of service with 2-level priority queuingCompliant with LACP IEEE 802.3ad Trunking (Link aggregation)Supports Auto-speedSupports Multicast IP table/IGMP v2 with 512 groupsSupports IEEE 802.1d Spanning trees for MAC bridge with redundant linkSupports port Mirroring (Sniffer)Support Broadcast Storm filteringEthernet transport with POTS / ISDN traffic over single copper wire pairSpectral compatibility with XDSL, ISDN(2B1Q/4B3T),HomePNA.Supports port security with MAC address filtering.Supports Web Base and Telnet for remote managementSupports system POST LEDSupports SNMP v1 RFC-1493 Bridge MIBs:RFC-1643 Ethernet MIB, RFC-1213 MIB II,Netsys Enterprise MIB(Fan and Temperature management)Supports RMON groups 1(Statistics), 2(Alarm), 3(Event), 9(History)Cascading up to 8 Units along with Giga switchSupports TFTP/XMODEM for firmware upgradeSupports In-Band/Out-of-Band ManagementSupports Fan & Temperature Monitor & managementSurge protected for VDSL portsSplitter on board10/100/1000Mbps Ethernet ports:2 x RJ-45 with auto crossoverPOTS/ISDN splitter port:8 x RJ-45VDSL port:8 x RJ-45MAC address table:8K EntriesSwitching method:Store-and-forwardRS-232 console port:DB-9Pin Female / 9600bpsPort security by MAC address filteringLED indication:Power good and POST LED, Link/Active/Speed Status for Ethernet port, Link for VDSL portVDSL Frequency Spectrum: Transmitter: 0.9MHz~3.9MHz, Receiver: 4MHz~7.9MHzPOTS/ISDN pass filter spectrum:0 ~ 630 KHzInternal switching power adapter Input: AC 85-265 volts/50-60Hz/1ADimensions: 435 x 255 x 44 mmOperating Temperature : 0°C ~ 50°C (41F ~ 122F)Storage Temperature : -20°C ~ 65°C (-4F ~ 149F)Humidity: 10%~90% non-condensingSafety: FCC, CE MarkRoHS compliant

Price: 225 USD

Location: Media, Pennsylvania

End Time: 2024-09-10T20:30:42.000Z

Shipping Cost: N/A USD