Netmedia BasicX 24 Stamp Microcontroller Development kit. Complete with LCD

Description: Up for sale are a small group of front panel displays and controllers using the NetMedia BasicX 24 Stamp controller IC. The assembly will come pre loaded with a program that will display a working LCD (Non back lit, reflective LCD from EDT (Emerging Display Technologies) LCD # EW162B0GR). The panel includes a total working controller which will allow a programmer to set up his own program to display on the 2 line 16 character LCD display. The PCB in which the BX 24 is socketed to (24 pin machine screw socket) also has a pushbutton switch on the panel that has a green and a red LED integral to it. The switch can be used for selecting items to control and the LED's can be used for user feedback. The panel is mountable and includes a handle. The handle can be removed if you wish. The PCB needs a 12VDC input of at least 2 amps to start. Actual run current is 60-70ma when operating. Max input voltage is 15V. A shrouded connector is on board to allow the controller to interface with functions off board. The outputs to this connector are buffered.This is a 20 pin header to connect to a ribbon cable. A person could produce a conversion board (not supplied) for a different Stamp module MCU to insert a different MCU Stamp to fit into the socket location for the MCU and run this board. This is a great controller card for the up and coming engineer and great for a design project that needs a clean interface for a design. Need a robotic interface or a project to read several Analog reads and display them back? This has so many applications it could fill. Think of your possibilities! WANT TO BUILD your OWN OR JUST WANT THE BASICX BX24 MODULE? For just the Basic Stamp module check out Ebay # 203914603639. If you want to assemble your own board and not have an Aluminum panel and I supply most of the specialized parts, check out Ebay auction # (TBD to come at a later date). This assembly has a DB9 Serial port (Com1-Com4 connector for uploading and downloading data) the user must have a computer with a Com port and a serial cable to download and upload user created programs. Also a 12VDC stable power supply to run.(THESE ARE NOT SUPPLIED). The Device comes with its own editor and compiler. You could set up and program with Visual Basic (not supplied). The editor and monitor programs in Basic. Included in this Bundle: Qty 1 Assembled Controller with LCD, Switch with integral LED's and operating PCB. Turnkey and will run program when power applied. Has reset button and contrast adjustment on board. Panel is black anodized aluminum Qty of 2 Netmedia BX-24 Stamp modules with the program loaded that operates the panel as seen in video. These also have two LED's on the BasicX module that are extra than the 2 on the push button. A CD with BX24 software for 32 bit Win95/Win 98 software loadedA CD with BX24 software for 64 bit WinXP/Win10 software loadedSchematic of Controller cardBOM of the Controller cardNetmedia "Getting Started" pamphletBX-24 Hardware Reference EDT Information on working with and programming the LCD panel This is a development kit. It is a blank slate for programming it for reading and controlling real world conditions. It is sold for use as an educational tool or an operational interface. These were removed from an inside environment and are in very good condition. The seller takes no responsibility for the use and operation of this device by individuals who may use it to cause harm to others. Thanks for looking and enjoy the auction. /O Lines21 total. 8 digital and 8 10 Bit ADCs/digital I/Os (16 standard i/o + 2 serial only + 3 i/o lines ouside chip footprint) EEPROM for program and data storage On board 32 KB SPI EEPROM Largest executable user program size = 32K RAM 400 bytes Analog To Digital Converter Port A consists of 8 10Bit ADCs that can also be used as regular TTL level I/Os or a mixture of both ADC Sample Rate 6000 samples per second maximum On Chip LEDs The BX-24 contains one 2 color surface mount LED (Red/Green) that is fully user user programmable. (Not counted as an I/O line) Program Execution Speed 83,000 lines of code per second Based on our speedtest.bas file Serial I/O Speed 2400 to 460.8 Kbaud on Com1 300 to 19,200 baud on any I/O pin using Com3 Operating Voltage Min/Max 5.0 VDC to 12.0 VDC Current Requirements 20 mA plus I/O loads, if any I/O Output Source Current 3 mA @ 5 V (I/O pin driven high) I/O Output Sink Current 20 mA @ 5 V (I/O pin pulled low) Combined Maximum Current Load Allowed Across All I/Os 40 mA sink or source I/O Internal Pull-up Resisters 120 k-Ohm maximum Floating Point Math Yes On Chip Multitasking Yes On Chip Time Clock Yes Built In SPI Interface Yes PC Programming Interface Parallel or Serial Down-loadable Package Type 24 Pin PDIP carrier board Environmental Specifications Absolute Maximum Ratings Operating temperature: -40 C to +85 C Storage temperature: -65 C to +150 CSpeed83,000 Basic instructions per second EEPROM 32K bytes (User program and data storage) Max program length 8000+ lines of Basic code RAM 400 bytes Available I/O pins 21 (16 standard + 2 serial only + 3 accessed outside standard dip pin area) Analog Inputs (ADCs) 8 (8 of the 16 standard I/O pins can individually function as 10bit ADCs or standard digital I/Os or a mixture of both) Serial I/O speed 1200 - 460.8K Baud Floating point math 32bit x 32bit floating point math built-in Programming interface High speed Serial Physical Package24 pin DIP module

Price: 75 USD

Location: Bolingbrook, Illinois

End Time: 2024-07-29T03:49:35.000Z

Shipping Cost: 14 USD