MOTORCYCLE LOWERING STRAP & BRACKETS SUZUKI GSXR1000 GSXR 1000 GIXXER 750 600

Description: MOTORCYCLE SUSPENSION LIMITFRONTEND LOWERING STRAP AND RADIALLY MOUNTED CALIPER BRACKETSFAST 1-3 DAY USPS PRIORITY MAIL INCLUDED!!!(APPLIES TO U.S STATES ONLY)THIS KIT HELPS ELIMINATE WHEELIES DURING LAUNCH FOR LOWER 60' AND QUICKER E.T'S.STRAP SPECS:1" PRESS RELEASE CAM BUCKLEPRE DRILLED BOLT PLATES AT THE ENDS4.5' OVERALL LENGTH 6500LB. TEST NYLON WEBBING 2180LB. RATED CAM-BUCKLE IF YOU ARE UNSURE, MEASURE FIRST. SOME BIKES HAVE 100mm CALIPERS. THIS KIT WILL NOT FIT THOSE BIKES.!!!THESE ARE 108mm (4.25") CALIPER BRACKETS!!!(see attached pic on how to measure your caliper to be sure your calipers measure the same)MOUNTING BRACKETS SPECS:Anodized black finish radial mount caliper bracket kit .This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching.These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.CNC Machine from 6061 Billet Aluminum and provided with stainless steel corrosion free hardware. SIMPLE UNIVERSAL INSTALL:JUST BOLT ONE END OF THE STRAP TO THE TOP LEFT FRONT BRAKE CALIPER BOLT. RUN THE STRAP UP AND OVER THE NECK OF THE FRAME (BETWEEN TOP OF GAS TANK AND TRIPLE TREE) AND DOWN TO THE TOP RIGHT CALIPER MOUNTING BOLT. TIGHTEN CALIPER MOUNTING BOLTS TO FACTORY TORQUE SPECS. TORQUE STRAP TO BRACKET AT 15ft/lbs (non-permanaent RED loctite is recommened). COMPRESS THE FRONT SUSPENSION WHILE PULLING ON THE STRAP HANDLE(THIS WILL KEEP YOUR SUSPENSION COMPRESSED AND HELP KEEP YOUR FRONT END FROM COMING UP DURING HARD LAUNCHES). WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them. THIS LISTING IS FOR A BLACK LOWERING STRAP AND A PAIR OF MOUNTING BRACKETS. SPEED-NEEDS PERFORMANCEPROUDLY MADE IN U.S.A!!!MOTORCYCLE SUSPENSION LIMITFRONTEND LOWERING STRAPS&RADIAL BRAKE CALIPER MOUNTING BRACKETS MSRP $159.99 THESE ARE 108mm (4.25") CALIPER BRACKETS(SEE ATTACHED PIC ON HOW TO MEASURE)WILL NOT FIT THE 100mm BREMBO CALIPERS Fits the Following Models:Suzuki Hayabusa 08-20Suzuki B-King 07-12Suzuki GSXR 1000 03-22Suzuki GSXR 750 04-22Suzuki GSXR 600 04-22Kawasaki ZX-14 06-22Kawasaki ZX-12 04-05Kawasaki ZX-10 04-15Kawasaki ZX-6R/RR 03-15Honda CBR1000RR 04-221-3 DAY USPS PRIORITY SHIPPING INCLUDED!!!(APPLIES TO ALL 50 USA STATES) NHRA IHRA CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA XDA MANCUP APPROVED!!!! THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION. THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60' AND QUICKER E.T'S.THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCCURS WHEN LAUNCHING HARD. STRAP SPECS:1" PRESS RELEASE CAM BUCKLEPRE DRILLED BOLT PLATES AT THE ENDS4.5' OVERALL LENGTH5400 LB. TEST NYLON WEBBING2180 LB. RATED CAM-BUCKLE RADIAL BRAKE CALIPER MOUNTING BRACKETS SPECS:Anodized black finish radial mount caliper bracket kit .These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.CNC Machine from 6061 Billet Aluminum and provided with stainless steel corrosion free hardware. DON'T SETTLE FOR CHEAP IMITATION POOR QUALITY KITS MADE IN CHINA! Be PROUD and buy AMERICAN made product! SIMPLE UNIVERSAL INSTALL:Begin by removing top and bottom brake caliper mounting bolts.Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the brake caliper. Torque bolts to 29 FT/LBS and repeat on the opposite side.Always route strap UNDER any cables and wires to prevent pinching or damage.Do not allow strap to twist. Route strap upward over steering neck, and down the other side.Attach the remaining end of strap and Tighten strap slightly to remove slack.Torque bolts on both sides to 15 FT/LBS. WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION. *It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them. NO warranty expressed written or implied. THIS LISTING IS FOR A BLACK STRAP & BRACKETS!!!!!THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER. ALL returns must be shipped USPS Priority at your expense (which is non-refundable). By purchasing this item you are accepting these terms.

Price: 106.92 USD

Location: Elkton, Maryland

End Time: 2024-08-03T01:54:42.000Z

Shipping Cost: 0 USD