ModeloDrive FRP DMA Wide Body Fenders 30mm (rear) /w Gas Cap S13 for Silvia Nis

Description: About Store Contact Shipping Feedback ModeloDrive FRP DMA Wide Body Fenders 30mm (rear) /w Gas Cap S13 for Silvia Nissan 89-94 modelodrive_119062 Description / Notes: Part #: modelodrive_119062 Make: Nissan Model: Silvia Material: FRP Condition: New Product Notes : ModeloDrive FRP DMA Wide Body Fenders 30mm (rear) /w Gas Cap S13 for Silvia Nissan 89-94 modelodrive_119062 Description : This is a DMA Wide Body Fenders 30mm (rear) /w Gas Cap manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition. New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer ModeloDrive fender flares are designed to extend the wheel arch for a more aggressive stance, often matching the style of a complete body kit. Depending on the style, some fender flares may need to be attached using rivet nuts with a rubber gasket between the flare and the original fender, neither of which is included. Additionally, more aggressive flares may require cutting and rolling of the original fender to allow for greater wheel clearance and a lower stance. Due to the nature of fiberglass, adjustments during installation are common, and care must be taken to ensure proper alignment and fitment to avoid gaps or uneven surfaces. Fenders ModeloDrive fenders offer an aesthetic upgrade, giving vehicles a sleeker and more customized appearance. These lightweight fiberglass replacements often require additional fiberglass reinforcement around the A-pillar and the fender mounting flange for durability and a secure fit. Trimming and reshaping the fender may be necessary to align with the vehicle’s mounting points. Modifications to factory components, such as removing fender liners or adjusting brackets, may be required to ensure proper installation. For best results, ModeloDrive recommends professional installation by a custom shop experienced in working with fiberglass. Traditional auto repair shops may lack the necessary expertise for proper trimming, cutting, or modifying fiberglass components. Like all ModeloDrive body kits and accessories, these fenders and fender flares are strictly for track, show, or off-road use. Due to Department of Transportation (DOT) regulations, most ModeloDrive fenders and fender flares are not street-legal. ModeloDrive does not endorse or recommend using these products on public roads or highways. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 404 USD

Location: Las Vegas, Nevada

End Time: 2025-01-11T09:27:34.000Z

Shipping Cost: 0 USD