Cardinal

Linear SGEKDC Safety Edge Kit for Slide / Swing Gate Openers, Monitored 10K

Description: Linear SGEKDC Safety Edge Kit for Slide or Swing Gate Openers, Monitored UL325 Complaint, Includes Transmitter and Receiver The SGEKDC kit includes one SGET transmitter and one SGER receiverIn a typical installation, the SGET is mounted on a motorized gate, door or barrier arm and wired to a 10K exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate.To insure full compatibility with all gate edge supervision features, NSC recommends Miller gate edge sensors with 10K only. Please specify when ordering sensor.The SGER is a wireless radio control designed for use with automatic gate openers or garage door operators. The radio format provides unparalleled security. Receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the transmitters code into the receiver’s memory. The receiver will retain its memory even without power. The receiver will activate only from these “memorized” transmitters.The receivers can operate from 10.5-30 volts DC and are normally powered from the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NEC Class 2 circuit.Works with all 10K monitored gate operators. Uses 10K terminated edges. 2 channels for up to 2 edges and transmitters per receiver. Low Battery alert before failure. Receiver powered by 12-30 VDC. 2 output relays. 10K during normal conditions, shorted during sense or power fail. Simple setup and programming. Audio and LED feedback for installation and troubleshooting. UL325 2016 approved for APeX2 operators. Hard wired motor sensing for 12-24 volt DC motors; non-contact ACSENS module for high voltage AC motors (115-460VAC)Payments & Returns Policy

Price: 124.95 USD

Location: Miami, Florida

End Time: 2024-11-30T10:19:12.000Z

Shipping Cost: 0 USD

Product Images

Linear SGEKDC Safety Edge Kit for Slide / Swing Gate Openers, Monitored 10K

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: Linear

Compatible Brand: Linear, Viking, Doorking, Apollo, HySecurity

Type: Transmitter and Receiver

Manufacturer Warranty: 1 Year

Model: SGEKDC, SGET, SGER

Package Quantity: 1

MPN: SGEKDC, SGET, SGER

Recommended

Linear amp does work good Preamp works 125w
Linear amp does work good Preamp works 125w

$89.00

View Details
Maruni XYA5-2-800-157 Linear Actuator Power Recliners Sofa Lift Chairs Motor
Maruni XYA5-2-800-157 Linear Actuator Power Recliners Sofa Lift Chairs Motor

$89.99

View Details
Palomar TX 75 Amplifier
Palomar TX 75 Amplifier

$75.00

View Details
2X Garage Door Opener Remote for Linear Multi-Code 3089 MCS308911 10 dip 300mhz
2X Garage Door Opener Remote for Linear Multi-Code 3089 MCS308911 10 dip 300mhz

$16.50

View Details
Kaidi Linear Actuator KDPT007-03 Motor Replacement Power Recliner Lift Chairs
Kaidi Linear Actuator KDPT007-03 Motor Replacement Power Recliner Lift Chairs

$84.99

View Details
DC 12V Small Mini Micro Linear Actuator 1.2" 2" 3" 4" Stroke Fast Speed 6inch /s
DC 12V Small Mini Micro Linear Actuator 1.2" 2" 3" 4" Stroke Fast Speed 6inch /s

$24.39

View Details
VEVOR 2PCS SBR/SFC Linear Guide Rail Slide Rail 4 PCS Bearing Block Rail Support
VEVOR 2PCS SBR/SFC Linear Guide Rail Slide Rail 4 PCS Bearing Block Rail Support

$39.99

View Details
2x SBR16 300-3000mm Linear Silde Rail Guide Shaft 4x SBR16UU Bearing Blocks SET
2x SBR16 300-3000mm Linear Silde Rail Guide Shaft 4x SBR16UU Bearing Blocks SET

$47.00

View Details
VEVOR Linear Rail SBR16-1500 mm 2 Rails 4 Bearing Blocks SBR16UU for CNC Machine
VEVOR Linear Rail SBR16-1500 mm 2 Rails 4 Bearing Blocks SBR16UU for CNC Machine

$67.09

View Details
10" 250mm XYZ CNC Linear bearing Stage Actuator Screw Motion Table Motor Stepper
10" 250mm XYZ CNC Linear bearing Stage Actuator Screw Motion Table Motor Stepper

$145.00

View Details