Description: Konnwei KW208 12V Car Battery Tester Cranking Charging Circut Tester 100 to 2000CCA Battery Analyzer 12 Volts Battery ToolsWhy choose KONNWEI KW208 ?1.System voltage 12 Volts and Voltage test in waveform2.Test Result Good, Recharge or Replace3.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.Internal resistance value (mΩ) and Life in percentage (%)4.Cranking system and Charging system5.Record and re-play battery data, Life-time free update service6.Battery test, cranking test, charging test and other additional functions.7.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB，DIN and IEC are supportedEasy to use battery testerWhether the battery is in the car or not. You only need to insert the pliers in the positive and negative poles of the battery to check the battery healthBattery TestingSOC (state of charge): refers to the state of charge of the battery, which mainly describes how much power is left in the battery;If the battery runs out, it will display 0%SOH (state of health) :refers to the state of health of the battery, mainly describing the degree of battery aging.Charging TestCharging test is used to check and analyze the charging system (generator, rectifier, rectifier diode, etc.) status, displays load voltage, unloaded voltage, ripple status, charging system status, thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly or not, which avoids damaging the battery and shortening its life greatly due to overcharging or incomplete charging.Cranking TestThe cranking test is used to test and analyze the actual required cranking current and cranking voltage to check the starting motor works properly or not. The test result displays cranking time, voltage, and status. If the stating malfunction may cause an increased starting loaded torque; or rotor friction of the starting motor generates increasing friction of the starting motor itself.KONNWEI KW208 support battery types1.CCA:100-20002.BCI:100-20003.CA:100-20004.MCA:100-20005.JIS:26A17-24SH526.DIN:100-14008.IEC:100-14007.EN:100-20008.SAE:100-20009.GB:100-1400KW208 Support LanguagesEnglish, German, French, Dutch, Russian, Spanish, Italian ,Portuguese
Price: 21.99 USD
Location: Shenzhen
End Time: 2024-07-28T00:54:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: KONNWEI
Battery Test Type: AGM, Flooded, Gel
Accessories: User Manual, Clamps
Voltage: 12V
Manufacturer Part Number: Does Not Apply
Set or Single Item: Single Item
Features: Bad Cell Detection, LCD Display, Multi-Language Interface
Country/Region of Manufacture: China
