Kirker Enduro Prime Epoxy Primer 1 Gallon - Black

Description: Listing Template 2018 Home About Us Shipping Returns View Feedback Contact Us Kirker Enduro Prime Epoxy Primer 1 Gallon - Black - EP612 The Kirker Enduro Prime Epoxy Primer is a two-component epoxy primer known to be free of isocyanates and lead chromate. This primer shows exceptional adhesion qualities and tremendous resistance to corrosion. It dries quickly and retains color much longer. This epoxy primer is made in the USA. This epoxy primer provides a strong and durable foundation for partial and total repair work. Suitable for application on a variety of substrates such as fiberglass, body fillers, aluminum, prepared steel and factory finishes, this epoxy will not lose its quality when you sand it after 2-3 days of application. How to prepare the surface for using the Kirker Enduro Prime Epoxy Primer Sand surface to remove rust or to neutralize any traces of oxidation.Remove all traces of wax, silicone, oil and grease with detergent wash. Follow it up with a solvent wash.Abrade substrate with 180 grit sandpaper and re-clean with final wash cleaner. If you want to enhance adhesion to bare metal, a chemical pre-treatment will help. Factory finishes will go through these same steps of surface preparation except that they need to be abraded with 320-400 grit sandpaper. How to use the Kirker Enduro Prime Epoxy Primer Mix this epoxy primer with the epoxy catalyst in a 1:1 ratio. It does not require any induction time.Mix only as much primer as you require to finish the immediate repair job.Use one of the spray gun types from conventional siphon feed, conventional gravity feed, and HVLP. Refer to the manufacturer’s specifications for tip size and air pressure. Apply one or two wet coats, depending on the desired film build. Leave a flash time of 30 minutes between coats. Allow Enduro Prime to stay for 30 minutes before applying the topcoat. When you apply two coats, you need to wait for 45-60 minutes before the topcoat. Key Features of the Kirker Enduro Prime Epoxy Primer Simple 1:1 mix ratio with catalystDoes not require any induction timeCures fast, fills pits on metal, and can be easily sandedLong lasting and resistant to corrosionShows wonderful adherence to bare metal and other substratesBlack colorGallon sizeMade in USANote: This product requires a catalyst. Catalyst is sold separately. About Us Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000 Feedback We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence. View Our Categories

Price: 75.1 USD

Location: Elgin, Illinois

End Time: 2024-02-26T12:48:03.000Z

Shipping Cost: 13.99 USD