Karl Suss MA56/MA 56 MPM GaAs Mask Aligner

Description: Karl Suss MA56/MA 56 MPM GaAs Mask Aligner Comes with what you see in the pictures. If you don't see it, you probably won't get it. Specifications are from the Karl Suss manual (and definitely has specifications for items that don't seem to be included) and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit was purchased from a university but it was originally owned by Hewlett Packard/Agilent. It appears to be missing some acessories (specifications will reflect items not included most likely). There are appears to be some air fittings missing from the air/vacuum/nitrogen handling section. The Microscope seems to be missing some sort of mount. It is sold as-is, where is, untested besides basic power. The Unit's Serial Number Tag Reads: Type: 10300244 Serial Number: 1054 Power Requirements: 110 V, 60 Hz, 1500 VA The Installed Lamp's Information Reads: Model Number: USH-350DS Serial Number: MD1267 Additional Information (from the system): Main Chuck is 4" Dia. The Holders are 4", 3" and 2" Main System Setup: Machine equipped with automatic prolonger, mounted on a X-Y-Z-THETA-stage for manual realignment to process pieces. Machine prepared for adaption to different wafer sizes to 3" X-Y-Z-THETA-stage: pressure of head for wedge error compensation extremely low and adjustable for substrate protection Adjustable vacuum under the wafer with pressure indicator Diffraction reduced lamp house with: optics tube, mirror house, moveable, without optics kit Stepper motor driven, microscope movement, synchronously operating with alignment stage Electrical manipulators, all movements with variable speeds Machine base including shock absorption Electronic control with program selection Machine connectable to vacuum, compressed air, nitrogen Additional Setup Information: Electrical Equipment MA56MPM GAAS 110 V/60 Hz Optics Basic Assembly MA56: High Resolution Contact UV300 Adapter Kit MA56 MPM GAASW-SPEC: for 50mm ±1mm dia. wafers, vacuum pickup area according to original customer specification Spindle Kit Z-Axis MA56/1.0 micron, smallest step 1.0 micron Mask Holder MA56/POS/NEG/RD/M-3/W-2/REV: mask 3" x 3" resp. 4" x 4", wafer dia. 2". Specially for use with Splitfield-Microscope REV. Mask Holder 4" mask, 2" wafer. Chuck SHAPRO/VAC/CONT/MA56 GAAS/30MM-2: Wafer diameter 30 mm up to 2". Wafer thickness max 630 microns. Position of the proximity balls adjustable between 30 mm and 2". Two separated vacuum areas: one smaller than 8 mm, one between 20 and 32 mm, and the other ring system is switchable. Suss Microscope Splitfield M230SP/MA56/75W/BF/REV: Two three position-turrets, glass fiber optics 75 W, combined coarse and fine adjustment Suss Microscope Splitifeld M200SP/MA56/GAAS/FT: with glass fiber illumination 75 W, with crosshairs built-in, trinocular head for additional video application, combined coarse and fine adjustment Microscope Adapter M200SP/MA56/GAAS/FT/Y Above Prealignment Station Y-movement: with home position for reference 3.5X Objective, NPL 10X/0.20P Objective, 20X Objective, 20X LL Objective 6.3X P Eyepiece, 10X GF Eyepiece $250.00 minimum for packaging, handling, and order processing. Shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 03/22/17

Price: 8499.99 USD

Location: Phoenix, Arizona

End Time: 2024-08-29T22:30:59.000Z

Shipping Cost: N/A USD