Description: BUY WITH CONFIDENCE FROM A J&M TRAINED AND AUTHORIZED MASTER DEALER FOR OVER 30 YEARS J&M ROKKER Stage6 Audio Kit 400w Amp/6.71" Fairing Speakers for 2015-2023 Harley RoadGlide/RG Ultra/RG-3 Fairing Amplifier Output Power: 400w RMS total (200w x 2 externally bridged)(100w x 4) into 2-ohms at 14.4vdcAmplifier Class: Class D properly shielded against FM interferenceManually Adjustable: Easily adjustable during installation with small screwdriverExternal Dimensions: 7 ¼” x 4 ¾” x 1 ¾” (in.)Mounting Options: Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairingRadio Compatibility: Amplifier is tuned for connection to the Harley GTS, 6.5GT, or 4.3 Std radio with Stock Harley Flash and is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14Speaker Size: 6.71” (in.) DiameterCone Construction: Black Glass-FiberTweeter: PEI Dome High-OutputFrequency Response: 30-23kHzSensitivity: 90 dbMagnet Material: Lightweight NeodymiumImpedance: 2 OhmsMaximum Power: 300 WattsRMS Power: 200 WattsMounting Depth: 2 7/8” (in.)Weather Resistant: YesOEM Size Match: YesComparision Rating: ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate Description The new ROKKER 4-channel 400w amplifier kit has been externally bridged for 2-channel operation and designed specifically for use on the 2015-2023 Harley® RoadGlide, RoadGlide Ultra or RoadGlide3 fairing with the stock Harley 4.3 Std, 6.5GT or GTS touch-screen radio, and is tuned for the stock Harley flash, NO SPECIAL FLASH needed. This new amplifier kit is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14 This is a full range class D amplifier and is spec’d at 100watts RMS per channel X4 channels or 200watts RMS per channel X2 channels (400w total) driven continuous into a 2- or 4-ohm speaker load. Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing. Custom made plug-n-play JMC red-band wiring harnesses are included with this complete amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions. Amplifier itself measures 7 ¼” x 4 ¾“ x 1 ¾”. New ROKKER-2 XXR series 6.71" speakers are designed as exact size component/replacements for the stock 6.5" Harley fairing speakers as installed on the 2015-2023 Harley RoadGlide, RoadGlide Ultra and RoadGlide3 fairing All new high-output PEI dome tweeter is mounted into the custom ROKKER2 grills. Spec'd at 2 ohms impedance and 300 watts maximum input (200w RMS - 90db sensitivity). Lightweight waterproof one-piece woven-fiber driver cone with super-rigid metal basket design. High-density Neodymium magnet structure, specially coated to maintain flux-strength integrity even at extreme operating temperatures. Mounting hole pattern and spade electrical connections are exactly the same as the factory specification. Harley Radio Programming Note: If your Harley infotainment radio was previously flashed to a different configuration from stock, (i.e., BoomI or Boom II) instruct your dealer to re-flash the radio back to “” 4-Speakers, Upper-Fairing, Rear-Pods, No-Amp “” using the Harley or other brand digital technician, prior to the installation of this complete kit.
Price: 772.99 USD
Location: Troy, Ohio
End Time: 2024-02-10T19:16:59.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: J&M Motorcycle Audio
Warranty: 2 Year
Manufacturer Part Number: RKT6-400HR15
