Industrial R 134a Replacement Refrigerant. Auto (8oz) 3 Cans

Description: The product is a set of three 8oz cans of EnviroSafe Industrial R 134a Replacement Refrigerant. It is a universal fitment for auto air conditioning systems and is manufactured by AC with the part number 1030. The product is designed to replace R 134a refrigerant and is not a performance part.Each can is equivalent to 21 ounces of 134a!This refrigerant can be charged under a vacuum.This product was designed and developed to meet the needs for colder air for some applications in auto, agriculture and commercial applications.Enviro-Safe Industrial 134a Replacement Refrigerant will work in small vehicles, sedans, minivans, SUVs, and large SUVs (Suburbans & Expeditions, etc), systems with dual air and even includes semi tractors.This refrigerant also works for agriculture needs (tractors, combines, etc) and other pieces of equipment where greater cooling is required because of hydraulic lines under the drivers seat or on top of the cab. Anything with a lot of glass makes this a perfect refrigerant!This refrigerant can also be used in applications such as milk houses, cooling tanks, pasturizing equipment, water coolers, soda machines, ice machines, refrigerators, and dehumidifers are just a small list. Basically, anything that already has R134a in it or anything that has been retrofitted to R134a.Enviro-Safe Industrial 134a Replacement Refrigerant can replace R134a.NOT FOR USE IN AMMONIA SYSTEMS!This is our coldest refrigerant we have for automotive use in hot climates with high humidity.About 5° colder than Enviro-Safe R134a Replacement Refrigerant with Dye.Operates at lower head pressureOffers improved cooling properties and performanceCompatible with most refrigerant oilsNon Ozone depletingNon Global warmingR134a can threadUse up to 60% LessMade in America!Enviro-Safe has been manufacturing hydrocarbon refrigerants since 1996. Flammable to an open flame or spark and proceed with caution if used in systems designed for non-flammable refrigerants.DIRECTIONS FOR USE:NOTE: You must check and repair all leaks before charging!1. Shut off compressor.2. Recover existing refrigerant into suitable container.3. Check for any leaks in the A/C system.4. Connect gauges and hoses with compressor off.5. To install product, invert can and install product liquid on low-pressure side.6. After minimum charge, test system for leaks. If no leak is detected, turn compressor on high and add additional product to achieve correct pressure. DO NOT EXPOSE TO ANY IGNITION SOURCE.7. This product is flammable to open flame/spark and should be leak tested with dye charge, UV glasses, an electronic hydrocarbon leak tester or soap bubbles. If leak is detected, ventilate area, evacuate system, repair leak and install new product as instructedabove.8. If pressure and temperatures are correct, shut off compressor and engine, disconnect gauges; install service port caps and system label in clearly visible area. DO NOT OVERCHARGE. Exceeding 60 psig on the low side may damage compressor. Fill low pressure to manufacture’s specifications. In some cases, clearing the sight glass might overcharge the system. Overcharging the system may affect cooling ability and performance.Please refer to the manufacturer's specification prior to recharging the a/c system for proper pressures.DO NOT overfill the system.DO NOT exceed 60 psi on low pressure port. The low pressure port is generally the larger diameter line from compressor.Flammable to an open flame or spark, proceed with caution if used in systems designed for non-flammable refrigerants.DO NOT smoke or use spark, or flame when using any refrigerant, refrigerant support product, other flammable products, when servicing air conditioning equipment. The Temperature Pressure Chart is specific to the temperature of refrigerant when inside of the a/c system. These PSIG pressures are not the operating pressure. The Temperature Pressure Chart displays the readings to charge on manifold gauge, to your a/c systems to refrigerant.

Price: 44.99 USD

Location: Pekin, Illinois

End Time: 2024-08-29T18:39:05.000Z

Shipping Cost: N/A USD