Description: Ibanez RG321MH Neck Modified Wizard II AANJThis started life as an Indonesian Wizard II neck. What you see is what you get, the condition is as shown. It has been modified extensively, is working as it should and plays surprisingly well:Refret to Dunlop 6105, ~ .090" x .055" minus a leveling.Nut is Graph Tech with a brass shim underneath, string spacing widened from 1 5/8" to 1 11/16" at nut.~ 43mm wide at nut, ~59mm wide at the heel. The increased width at nut and heel accomplished by flaring out the binding very slightly slightly as shown on the last pic.~18.7mm thick @ 1st fret, 20.95mm thick at 12th fret, back profile made thinner and flatter than stock, more "D" than "C".~16" radiusWhite Dots replace with abalone (laminated/synthetic).Cosmetic issues:Filled holes for a Kahler lock nut under the trussrod cover, visible from up close.Binding and finish is yellowing.Additional 7-o'clock holes for Gotoh tuners at some point.Other normal wear from age, small scratches only visible up-close, won't photograph.This should not be put on a $2000 Prestige, obviously. But for a budget RG project you can get the wider string spacing and thinner profile found on Prestige necks without shelling out 2-3x the coin. It will still fit in the non-Prestige pockets without issue, however, as the mods were above or outside of the pocket portion of the neck. Add locking tuners for locking trem use, the Graph Tech nut will keep you in tune.
Price: 119 USD
Location: Burlington, North Carolina
End Time: 2024-11-18T02:51:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Ibanez
Type: Neck
Color: Clear
Material: Maple, Rosewood
Country/Region of Manufacture: Indonesia
To Fit: Electric Guitar
