Hobao Hyper Mt Sport Plus Elec Rtr W/Hw150A Esc18Kg Servo

Description: This is the HoBao Glow Powered, Radio Controlled, 1/8 scale, Ready to Run Hyper MT Sport Plus Monster Truck with Gray Body. FEATURES Chassis: Aluminum, monocoque design Drive: Four wheel shaft Transmission: Heavy duty 2-speed, fully adjustable Differentials: Front, center and rear with steel gears Engine: Hobao Hyper 30 with slide valve carb, Hobao T5 turbo platinum glow plug, and large plastic pull-start handle, two-stage foam air filter Exhaust: Aluminum tuned pipe with polished natural finish Radio: HoBao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering and throttle, charge jack on transmitter for optional NiCd batteries, high output digital steering and throttle servos Servos: HoBao HB 5514 waterproof, metal gear, ball bearing equipped digital servos, 194oz-in (14kg-cm) torque Suspension: Front and rear lower composite suspension arms, front and rear stabilizer bars Shocks: Oil=filled aluminum body super stroke Shock Towers: Composite plastic Fuel Tank: 8.4oz (250cc) Clutch: Three shoe composite, 14 tooth steel clutch bell Spur Gear: 32 tooth steel Tires: Off-road, rubber construction with foam inserts 7.2" (182mm) diameter, 3.8" (96mm) wide Wheels: Six spoke, gray in color, 17mm hex Body: Trimmed and painted in gray with red, black, white and yellow color scheme Brake: Dual disc Ball Bearings: Full set, rubber sealed Caster: Adjustable front and rear, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES RTR Hyper MT Sport Plus Monster Truck with .30 cu in (4.9cc) Engine, 3-ch Radio, Steering and Throttle Servos, Decal Sheet, Body, Air Filter and Instruction Manual REQUIREMENTS AA Batteries: Twelve, 8 for radio, 4 for receiver Nitro Fuel: Car blend with 15-30% nitro content, 30% required for engine break-in Maintenance equipment SPECIFICATIONS Vehicle; Length: 22" (560mm) Width: 18.5" (470mm) Height: 10.2" (260mm) Wheelbase: Weight: 10.9lbs (4960g) Body; Length: 19.4" (492mm) Width: 7.3" (185mm) at widest point Height: 5.3" (134mm) Carburetor Needle Settings; Factory Default After Break-In Top End (high speed): 3 turns out 2-1/2 turns out Bottom End (low speed) 1/4 turn out flush w/ball collar Mid Range: Flush-do not touch Flush-do not touch Idle Screw 1mm (1/16" ) 1mm (1/16" )

Price: 444.95 USD

Location: Victorville, California

End Time: 2024-11-28T19:10:16.000Z

Shipping Cost: 19.95 USD