HAAS TRT100 5th Axis one year old

Description: Installed in Dec 28th 2023 and used less than 4 hours, this is basically brand new and I had HAAS do a system check to insure as new condition. It is heavy and can be shipped. I will change actual Freight cost plus crate material if I cannot find one. It weights 250lbs without the crate. I will assist in shipping, but to not confuse the buyer, please check for correct cost, not what ebay is figuring out. The TRT100 is a dual-axis tilting rotary table that offers high-speed, accurate performance for 3+2 and full 5-axis machining of small parts. It fits into DM/DT Series or larger machines. It is ideal for smaller parts – medical, dental, microwave housings, etc.Note: Requires a Haas mill with 4th- and 5-axis drive and NGC software version 100.19.000.1100 or later for full 4th- and 5th-axis operation. PlatterS.A.EMETRICPlatter Diameter3.94 in100 mmMax Weight on Platter15 lb6.8 kgPart Swing Max8.4 in214 mmHole Pattern(3) 6-bolt patterns(3) 6-bolt patternsMax Part Size - 3+2 IndexingØ 5 in x 5 in x 15 lbØ 127 mm x 127 mm x 6.8 kgMax Part Size - 5-Axis MachiningØ 3 in x 3 in x 5 lbØ 76.0 mm x 76.0 mm x 2.3 kgSpindle - A (tilt)S.A.EMETRICMax Speed1000 °/sec1000 °/secMax Torque105 ft-lbf142 NmGear Ratio24:124:1Brake Torque @ 100 psi/6.9 bar100 ft-lbf136 NmAccuracy (±)± 50 arc-sec± 50 arc-secRepeatability30 arc-sec30 arc-secTravel120 °120 °Spindle - B (rotary)S.A.EMETRICMax Speed1000 °/sec1000 °/secMax Torque16 ft-lbf22 NmGear Ratio7:17:1Accuracy (±)± 45 arc-sec± 45 arc-secRepeatability30 arc-sec30 arc-secTravel360 °360 °Brake Torque @ 100 psi/6.9 bar40 ft-lbf54 NmIndexing - A (tilt)S.A.EMETRICResolution0.001 °0.001 °Indexing - B (rotary)S.A.EMETRICResolution0.001 °0.001 °Air RequirementsS.A.EMETRICAir Pressure Max150 psi10.3 barDimensions - ShippingS.A.EMETRICExport Crate27 in x 21 in x 23 in69 cm x 54 cm x 59 cmWeight250 lb114.0 kg

Price: 20500 USD

Location: Duson, Louisiana

End Time: 2025-01-05T17:48:16.000Z

Shipping Cost: N/A USD