Description: HAAS HRC-210 P3 Sigma 5 Rotary TableThe HRC210 is driven by a high-performance roller cam system that uses a high-torque servomotor to drive a globoidal cam meshing with cam followers equally spaced around the diameter of a roller gear. Needle bearings in the cam followers provide smooth contact with the cam, and a precision-engineered cam profile ensures accurate speeds and motion. Because the roller drive is preloaded during assembly, the system yields high stiffness, high torque, and high speeds, while providing low wear characteristics and reducing maintenance. Requires HASS software 18.13 or higher. Includes the two cable / two connector wiring along with the shielded air line. Adding a 4th-axis rotary table to a machining center is a proven way to boost productivity, reduce setups, and increase accuracy on multi-op parts. Adding a fast rotary table to a fast machine creates a high-speed package that slashes cycles times even further. The HRC210 from Haas Automation is a high-speed, cam-driven rotary table that provides cutting and indexing speeds up to 830 degrees/second. Here is a video an HRC-210 in action:https://youtu.be/sHkyzQCRZ64?si=mbd1W6o5hmYIlPLZ SPECS210 mm (8.3") Roller Cam Rotary Table with 830 deg/sec indexing. Includes the necessary 4th-axis wiring. You will need your own servo driver in the machine. Requires a Haas mill with software version 18.13 or later to operatore. Not available for stand-alone operation. It provides 110 ft-lb (149 Nm) of spindle torque for synchronous 4-axis machining, and has a pneumatic brake that yields 134 ft-lb (182 Nm) of holding torque for stationary work. Indexing accuracy is +/-20 arc-sec, with repeatability of 4 arc-sec. The 8.27" (210mm) platter of the HRC210 has a center height of 6.000" (152.40mm), with a 2.00" x 1.91" deep (50.8mm x 48.5mm dp) pilot bore and 1.77" (45mm) through hole. Six radial T-slots simplify fixture and workpiece mounting, and both manual and pneumatic tailstocks are available for additional workpiece support. Why we could not use it:Our 2006 HAAS Super Mini-Mill will only support up to the HRT-210 P1 (Sigma 1). So the HRC Sigma 5 unit is not compatible with our current software version of 15.xx and can not go past 16.xx.
Price: 8000 USD
Location: Waynesboro, Virginia
End Time: 2024-09-29T19:59:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Haas
Operation: CNC
