Gigabyte GA-B75M-D3H Motherboard Intel B75 Express LGA 1155 DDR3

Description: Dear customers: This is Anny's shop, welcome to purchase our items, we will provide excellent products and professional service to you. We promised all the motherboards are carefully tested, 100% working, No DEFECT, NO FAULT, NO DOA, and shipped in a safe package. If any problem please contact us, because of the time difference, we may reply you late for hours, please be patient to wait, we must reply you in 12 hours, and give you safisfied solution. Warranty: Our item warranty is 90 days, if any problem, we can replace, exchange or refund. But please make sure the item was from me, because our items have warranty mark. Warm notes: 1. Please DO NOT use fake memory, because most of genuine band motherboards can't support that. 2. Please DO NOT use single-side memory, because some motherboards can't support that. 3. Some CPUs can't be supported by motherboard, please try to update the BIOS, please note that's not motherboard's defect. 4. Some "Can't boot" problem's caused by memory, please clean the memory's gold fingers and clean the motherboard's memory solts. Official specification: CPU 1. Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium®processors/Intel® Celeron® processors in the LGA1155 package 2. L3 cache varies with CPU (Some Intel® Core™ processors require a graphic card, please refer "CPU support List" for more information.) Chipset 1. Intel® B75 Express Chipset Memory 1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. 2. Dual channel memory architecture 3. Support for DDR3 2200(OC)/1600/1333/1066 MHz memory modules * To support DDR3 1600 MHz, you must install an Intel® 22nm (Ivy Bridge) CPU that supports DDR3 1600 MHz. 4. Support for non-ECC memory modules 5. Support for Extreme Memory Profile (XMP) memory modules * To support XMP memory, you must install an Intel® 22nm (Ivy Bridge) CPU that supports DDR3 1600 MHz. (Please refer "Memory Support List" for more information.) Onboard Graphics Integrated Graphics Processor: 1. 1 x D-Sub port 2. 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. 3. 1 x HDMI port, supporting a maximum resolution of 1920x1200 Audio 1. Realtek ALC887 codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. 4. Support for S/PDIF Out LAN 1. 1 x Realtek GbE LAN chip (10/100/1000 Mbit) Expansion Slots 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) (The PCIEX16 slot conforms to PCI Express 3.0 standard.) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. * The PCI Express x16 slot supports up to PCI Express 2.0 standard when an Intel 32nm (Sandy Bridge) CPU is installed. 2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) (The PCIEX4 slot conforms to PCI Express 2.0 standard.) 3. 2 x PCI slots Storage Interface Chipset: 1. 1 x SATA 6Gb/s connector (SATA3 0) supporting up to 1 SATA 6Gb/s device 2. 5 x SATA 3Gb/s connectors (SATA2 1~5) supporting up to 5 SATA 3Gb/s devices Multi-Graphics Technology 1. Support for AMD CrossFireX™ technology USB 1. Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) 2. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers) * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed. Internal I/O Connectors 1. 1 x 24-pin ATX main power connector 2. 1 x 4-pin ATX 12V power connector 3. 1 x SATA 6Gb/s connector 4. 5 x SATA 3Gb/s connectors 5. 1 x CPU fan header 6. 1 x system fan header 7. 1 x front panel header 8. 1 x front panel audio header 9. 1 x S/PDIF Out header 10. 1 x USB 3.0/2.0 header 11. 2 x USB 2.0/1.1 headers 12. 1 x serial port header 13. 1 x parallel port 14. 1 x Trusted Platform Module (TPM) header 15. 1 x Clear CMOS jumper Back Panel Connectors 1. 1 x PS/2 keyboard/mouse port 2. 1 x D-Sub port 3. 1 x DVI-D port 4. 1 x HDMI port 5. 2 x USB 3.0/2.0 ports 6. 4 x USB 2.0/1.1 ports 7. 1 x RJ-45 port 8. 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller 1. iTE I/O Controller Chip H/W Monitoring 1. System voltage detection 2. CPU/System temperature detection 3. CPU/System fan speed detection 4. CPU overheating warning 5. CPU/System fan fail warning 6. CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS 1. 2 x 64 Mbit flash 2. Use of licensed AMI EFI BIOS 3. Support for DualBIOS™ 4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features 1. Support for at BIOS 2. Support for Q-Flash 3. Support for Xpress Install 4. Support for Xpress Recovery2 5. Support for Auto Green 6. Support for ON/OFF Charge 7. Support for Q-Share 8. Support for LAN Optimizer (Intelligent optimization network management tool) Form Factor 1. Micro ATX Form Factor; 24.4cm x 22.0cm Remark 1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. 2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Price: 69.99 USD

Location: chn

End Time: 2024-01-28T03:34:11.000Z

Shipping Cost: 0 USD