Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake Caliper

Description: FORD 8" & 9" REAR DISC BRAKE KIT W/ E-BRAKE FOR SMALL BEARING , NEW TORINO BIG BEARING, OR OLD FORD BIG BEARING HOUSINGS , DRILLED AND SLOTTED ROTORS. Auction Includes : Choice of (2) Ford Drilled / Slotted Rotors , Zinc or Black Rotors , (5) on 4-1/2" Pattern (No Chevy)Choice of (2) Black or Red Powder Coated E-Brake Calipers , Loaded with Pads (1 Set ) Caliper Brackets that fit Small Ford , New Torino , or Old Ford Housings , Yellow Zinc Plated (2) DOT Stainless Disc Brake Hoses w/10mm" Banjo (Please Specify Black or Zinc Rotors & Black or Red Calipers) Ford 8" & 9'' Rear 11'' Disc Brake Kit w/Drilled & Slotted Rotor w/ E-Brake 11-1/4” diameter, 1” thick vented cast iron rotors dissipate heat faster than drum brakesServiceable design ensures good drivability and piece-of-mind when on the roadStreet-friendly GM D154 style pads, replacements available nearly everywhereGM “Metric” style single piston calipers with 10mm banjo-style inlets , Red or BlackFits Ford “Small Bearing, Torino & Old Ford Big Bearing” 9 inch housings from passenger cars and 8 inch rear endsUse with Ford 9 inch rear ends with 2-3/8” or 2-1/2” axle flange-to-housing offsetsSingle wheel bolt patterns covering all Ford (5x4.5” for 1/2” studs) No ChevyHub Register hole of 2.78". Minor opening of the Rotor hole will be required to fit your Hub register. Some axles require a 2.80", 2.82" of 2.84" Hole to fit the axle hub .Use with 15” or larger disc brake-style wheelsWill accept axles with Flanges up to 6-1/4" Diameter.Easy bolt-on installation with instructions.Includes heavy steel mounting brackets, Grade 8 hardware and nuts (everything you need)For E-Brake Cables look in my other AuctionsParts delivered in 2 Boxes ApplicationSmall Bearing 9" Ford Axle Housings Big Bearing "New Style Torino " 9" and Old Ford Axle HousingsSmall Bearing 8" Ford Axle HousingsAxle housings with minimum axle offsets of 2-3/8" to 2-1/2" Compatibility Notes Note 1......Factory or Aftermarket 2.43" Axle Hub Registers will require an 2.43" to 2.78" Hub Adapter. Note 2......Factory or Aftermarket 2.78" Axle Hub Registers fit this Kit w/ minor sanding. Note 3......Factory or Aftermarket 3.06 Axle Hub Registers require Wilwood Brake Kits. Note 4......Aftermarket 2.795" to 2.830" Axle Hub Registers will require machining the Disc Brake Rotor Holes for a clearance fit (.005" Oversize ). Note 5......Old Ford Housings must use 3/8" bolts instead of 1/2" .

Price: 459 USD

Location: Clemmons, North Carolina

End Time: 2023-12-27T16:57:31.000Z

Shipping Cost: 59 USD