Description: Features: The rocker arm shafts have a notch in them that the bolt is supposed to butt up against, locking the rocker arm shafts in place. However, the bolt hole is too large, leaving a gap. This gap allows the shaft to rotate and hit the bolt, causing a tick.1.The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick.2.The Rocker Lockers also center the inner rocker cover so that it is always located in the same position eliminating different wear patterns on the rocker arm/valve and a better alignment of the pushrod in the holes.3.The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place.It is recommended to replace the rocker base gaskets. This is the gasket that goes between the Rocker Cover Inner & the head on each cylinder. Package Included:4x Brass Precision Tapered Bushings2x O-Rings1x Washer & 1* Nut for installation1x Teflon Centering ToolNote:If you ever need to remove the lockers, just use a punch and tap them out, they are usually reusable.
Price: 10.52 USD
Location: Humble, Texas
End Time: 2025-01-12T12:30:53.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Unbranded
Manufacturer Part Number: Does Not Apply
UPC: 700000071948
