FENDER BLUES DEVILLE EARLIER USA MODEL VINYL FACEPLATE OVERLAY

Description: This listing is for the EARLIER MADE IN THE USA FENDER BLUES DEVILLE, NOT the HOT ROD DEVILLE version. Please verify that this is the one you need, or send me a clear photo of your amp control panel so I can help you. Easy to install. Change the hard-to-see white letters on a chrome background, to forward facing white letters on a black background. Or if your numbers and letters have worn off, this decal will bring your control panel back to life. When it arrives carefully remove the decal from the shipping box, gently unroll and lay flat, preferably in a warm place to help it flatten out. Carefully remove your knobs, then peel your decal from the backing, line it up and lay it down over the old panel. Smooth it out starting from the middle and work your way to the edges. Please read the following carefully to help you understand the difference between Standard Size and Oversized: The Standard Size version lays over the top of the faceplate without having to drop the chassis or remove the back panel. This version is the easiest to install though it may show a little Chrome around the edge. Some guys have used a black Magic Marker to fill that in. Simply remove your knobs, clean the panel, and apply the vinyl overlay. The Oversized version is slightly over-sized by a half inch so you will have to take off the back panel and remove chassis to install the decal to the faceplate. This version tucks nicely underneath the edge of the cabinet, so when you reinstall the chassis it has a real clean factory look. This is the one you want if your doing any mods to your amplifier since you will already have the chassis removed. The vinyl decal has a laminated matte finish, so the lettering won't rub off. Please contact me if you have any other questions regarding this item.

Price: 24.5 USD

Location: Salt Lake City, Utah

End Time: 2024-12-21T00:26:26.000Z

Shipping Cost: N/A USD