Description: Promotional Price Now! Price will be raised SOON! We are your premier choice when choosing a replacement for your bike’s Muffler! FITMENTHarley-Davidson 2014-2021 Sportster XL EXHAUST WITH CONTRAST CUT ENDS 1.Two-step header system for performance2.2-1/2” 0.D. one-piece blue-proof 220°coverage heat shield3.Stainless steel hardware for strength and rust resistance4.Removable baffle5.Systems come with oxygen sensor ports6.Offered in show-quality chrome or black7.One-year manufacturer’s warranty8.Easy 10-minute installation, like plug and play EXHAUST SYSTEM REMOVAL 1.Find and unplug the O2 sensor wires from the wiring harness. Feed the end of the wires through the frame so they are free from the motorcycle. NOTE: Pay attention to wire routing for re-installation.2.Loosen the heat shield clamps on both the front and rear exhaust pipes. This allows for easier access to the head pipe mounting nuts.3.Remove the two head pipe mounting nuts from each flange, located at the cylinder head.4.Remove the clamp bolt which mounts the rear head pipe to the belt drive cover bracket.5.Remove the two bolts from each muffler body where they attach to the mounting bar. Carefully remove exhaust pipes from the motorcycle and set aside.6.Remove the belt drive cover and take the bracket off the rear cover bolt, the bracket will not be reused.7.Remove the e-clip from the brack rod lynchpin.Remove the right side rider foot controls.8.Carefully remove the O2 sensors from the stock head pipes and save them for reuse with the new system.9.Remove the three mounting bolts and washers attaching the exhaust mounting bar, save hardware for reuse.10.Carefully remove exhaust port flanges and circlips from the stock exhaust system using snapring pliers. NOTE: Replace bent or damaged circlips.11.Replace the exhaust gaskets with the supplied gaskets. EXHAUST INSTALLATION 1.Loosen all heat shield clamps. Install the exhaust end caps using 1/4” bolt to 30-33 Ft/Lbs (supplied). If you buy end caps.2.Tighten all heat shield clamps.3.Install exhaust port flanges and circlips on new headers.4.Install and tighten supplied mounting bracket using stock washers and bolts. Torque to 30-33 Ft/Lbs. NOTE: To ease exhaust installation, insert one of the 5/8” flange head bolts into the upper right hole of the bracket before installation.5.Re-install drive belt cover. Torque the 3/8” bolt to 30-33 Ft/Lbs. and the two 1/4” bolts to 80-120 In/Lbs.6.Re-install brake rod into rear junction, replacing pin and e-clip.7.Apply a small amount of anti-seize compound to the threads of the O2 sensors and install them into the new head pipes. Models using 12mm oxygen sensors install 18mm to 12mm oxygen sensor adapter(supplied). Models not using oxygen sensors install 18mm plug. NOTE: Be careful not to get anti- seize on sensor tip, it may affect sensor function.8.Using stock flange nuts, carefully install head pipes into exhaust ports (Assistance may be required).NOTE: Do not tighten the nuts at this time.9.Slide nut plates inside brackets welded to backside of muffler bodies. While holding nut plates in place, attach muffler bodies to mounting bracket using four 5/16”x 5/8” flange head bolts (supplied). Leave them loose at this time.10.Tighten cylinder port exhaust flange nuts on front and rear cylinders while making sure pipes are parallel.11.Tighten the bracket flange head bolts on both mufflers.12.Plug O2 sensors back into wiring harness and route wires away from hot areas of motorcycle.13.Check for adequate clearance of all exhaust system components and motorcycle accessories prone to heat damage.14.Be sure to tighten all hardware before starting motorcycle. NOTE These instructions are written for late model motorcycles equipped with O2 sensors. If you are installing these pipes on a bike which is not equipped with O2 sensors, ignore all instructions which reference them. EXHAUST CARE 1.When installing a new set of exhaust pipes, make sure your hands are clean and free of oil.After installation, thoroughly clean pipes with a soft cloth and soapy water that will leave no residue before starting the motorcycle. Dry with a soft towel. Any residue will stain the finish when it heats up. Do not use solvents or abrasive cleaners which can damage the finish.2.Avoid long periods of idling as this can cause discoloration.3.Intake leaks can cause the engine to run lean and overheat, this could lead to discoloration.4.Make sure there are no exhaust leaks at the junction of the exhaust pipes and cylinder head. California Customers In California, in order to meet Air Resources Board emissions requirements, certain aftermarket part applications have been identified as replacements, and others have received ARB Executive Orders. All other emissions related aftermarket parts are for competition use only. A list of replacement parts and EO parts, and corresponding fitment is provided at firedragonbros.com CUSTOMERS FEEDBACK We kindly ask you not to leave a negative feedback before you contact us in case of any problems. Please give us a positive feedback. We strive to offer you the top quality products with the best prices and in order to maintain that, the positive rating is a very important factor. Let us create a positive eBay community together!Thank you for shopping with us. PAYMENT Paypal is our only method of payment. In an effort to best control our inventory levels, we reserve the right to limit quantities or cancel unpaid orders. Please note: Inventory is not reserved until the item is paid for. Please include a phone number as FedEx, USPS and most shipping companies require it.We prefer to ship to a confirmed Paypal address and we may contact you for additional verification if needed. SHIPPING We process our orders the same day we receive them! If an order reaches us after the business hours, we ship it right next business day. Place your expedited order by 3:00 PST Monday thru Friday and it will be processed same day. If you place your order after 3:00 PM PST, it will be shipped the next business day. Orders subject to details confirmation may result in delayed shipping. Sorry for all the inconvenience. We use FedEx HOME DELIVERY for most of our domestic orders. In order to protect our customers, we reserve the right to ship packages signature required occasionally. For example, if you live in an apartment without a doorman. If this is a concern, be sure to provide an address where someone will be around to sign. We DON’T offer shipping to PO Box, Alaska, Hawaii, APO/FPO, US Protectorates. Why? The cost is too high. It should take 1 - 5 business days for the product to reach your destination. If the product doesn't arrive within the time limit, please give it an additional 1 to 2 business days in case of postal delays and/or possible technical issues. If it takes any longer than that, please do not hesitate to contact us to resolve the issues. So sorry, but we CANNOT ship internationally. RETURNS If you would like to return your purchased merchandises, kindly, contact us via eBay message.In case of returns, the returns are eligible within 30 days after the product arrives. In case the product arrives damaged or there are any shipping errors (e.g wrong item or size) or the merchandise received is not as described, you will not be responsible for the return cost. We will provide you with prepaid pickup labels. For any other reasons, you may be responsible for partial or full return shipping fee. As for returns such as change of mind, mistaken purchases, or buyer’s remorse, you will be responsible for the round trip shipping costs. Returned products must be in brand-new condition and be kept in the original, undamaged manufacturer's packaging. Please do not place returned labels on top of the original shipping label. Please Note: Replacements or refunds will NOT be provided until we have received the returned items in our warehouse. Once the item has been received in our warehouse and we can confirm from the tracking number that the item has been delivered, we will issue you the refund for the purchase. You have 30 days grace period after the delivery of the item to complete the return. In the first 30 days from delivery of your purchase, you may return the merchandise for a full money back , excluding any shipping charges (Our standard shipping charges will be deducted from any refund or credit).
Price: 199.01 USD
Location: Sacramento, California
End Time: 2024-04-23T08:10:32.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Diameter: 2-1/2in.
Item Length: 30in.
Material: Steel
California Prop 65 Warning: Disclaimer: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related parts, devices, or systems that alter the performance of OEM emission-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information. NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
Type: Muffler
Color: CHROME
Manufacturer Part Number: F009521+2×F010172
Finish: Chrome
Brand: FDB
Manufacturer Warranty: 1 Year
