Extra-Fine Tuning Set of FPS Spring Spacers for Game Face Trion (PETG)

Description: This set of FPS spring spacers for the Game Face Trion allows you to very finely tune the FPS of the blaster. Printed in PETG for extreme durability with 100% infill (all walls). These spacers can be combined with each other to get in-between strengths such as 2.3x and so on. Same width as the stock spacers but with a slightly smaller internal diameter so there is less play to eliminate rattling. All spacers are marked with the power level that they are. Available in the following options: • A set of ten spacers that step in 0.1x increments from 0.1x of the original size to 1.0x • A boosting set of four spacers that are 1.5x, 2.0x, 2.5x, and 2.8x (the maximum the blaster is capable of) • A set of all 14 above for a discounted price. • NEW! Quick tuning set of 0.25x and 0.5x which can be used with the stock spacers to get you (0.25x, 0.50x, 0.75x, 1.0x, 1.25x. 1.50x, 1.75x, 2.00x, 2.25x, 2.50x, and 2.75x, very close to max capability!) Includes: Set of Game Face Trion FPS Springs Spacers. Color is random but will usually be non-black to avoid them getting lost easily. Contact me if you need a specific color. Installation: Installs just the same as the stock spring spacers. Install the smallest spacer first when combining to prevent warping the smallest ones over time. Attribution: Designed by Transmogrification Labs. Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 6.41 USD

Location: Huntsville, Alabama

End Time: 2024-11-05T20:46:49.000Z

Shipping Cost: N/A USD