Ethernet Fiber media converter multimode, Fast Ethernet 2Km, SC,10/100M

Description: Technical Specifications The Converter conforms to the following standards: Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX Connectors (RJ45-UTP and Fiber SC or ST) >Multi-mode: RJ-45 and SC/ST Connector >Single-mode: RJ-45 and SC Connector LED: POWER, FX 100, FX Link/Act, TX Fdx,TX Link/Act, TX 100. Data Transfer Mode :10/100Mbps Duplex Mode: Full or Half Duplex Mode Power Requirement : AC 100-260v DC 1A@+5V Ambient Temperature: 0 ～ 70℃ Humidity: 5% to 90% Dimensions: External Power 26 x 71 x 97mm (H xW x D) Cable: UTP Cat. 5 UTP cable Your Fiber Media Converter carton should contain the following items:  10/100M Fiber Media Converter  AC-DC Power Adapter  This User's Guide Please notify your sales representative immediately if any items are missing or damaged. The 10/100Base-TX to 100Base-FX Fast Ethernet Converter is fully, *Multi-mode: SC/ST Fiber Connector *Single-mode: SC/FC/ST Fiber Connector *Single-mode Single Fiber: SC Fiber Connector Six LEDs display instant status monitoring for Power, TX Fdx, FX (Link/Act), Tx (Link/Act), Fx100, Tx 100. 3. Installation Please follow the procedure outlined below:  Turn off the power of the device/station in the network in which the Media Converter will be installed.  Ensure that there is no activity in the network.  Attach fiber cable from the Converter to the fiber network. The fiber connections must be matched-- transmit socket to receive socket.  Attach a UTP cable from the 100Base-TX network to the RJ-45 port on the Converter.  Connect the power cord to the Converter and check that the Power LED lights up. The TP

Price: 37.99 USD

Location: Apex, North Carolina

End Time: 2024-12-26T16:41:54.000Z

Shipping Cost: 0 USD