Description: MAX EMC A/BEpoxy Molding Clay 1 Quart PART A And 1 Quart PART B (Half Gallon Combined Volume)NO STRONG ODOR AND HEALTH HAZARD OF POLYESTER RESIN Moldable Clay-like Consistency That Can Be Rolled, Shaped and Sculpted To Shape Sandable, Drill and Tapped, Carvable, Machined, Paintable Upon Cure Excellent Adhesion To Epoxy, Polyester or Vinyl Ester Fiberglass For Repairing Boat Hulls Excellent Adhesion To Aluminum, Steel, Concrete/Ceramic, Wood and Composites Lightweight Density, Less Than 0.95G/CC (Will Float On Water) For RC Hobby Use 14,000-PSI Compressive Strength Excellent Water/Salt Water Resistant for Marine/Aero Applications Very Low Shrinkage- Dimensionally Stable And Will Not Swell During Cure Void Free Results and Excellent Detail Pick-up and DuplicationDescriptionMAX EMC A/B is an epoxy-based molding and modeling resin system that offers a formable compound that cures to a hard and durable polymer.MAX EMC holds its profile when sculpted or formed to shape.Upon cure, MAX EMC demonstrates excellent dimensional stability, high compressive strength, sandable and paintable finish. MAX EMC cures to a tough but sandable compound suitable for mold making, machinable parts modeling, patching holes on composites panels, wood or metal boat hulls. It is also can be used as an adhesive for lightweight applications such as RC hobby craft, capable of bonding metals, composites, fiberglass, and SMC (Sheet Molding Compound) parts. MAX EMC with Chopped Carbon Fiber Wood Filler MAX EMC A/B -Epoxy Molding Clay used for void and gap filling application. Wood void fill compounds Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Carbon Fiber Hose Shielding For Engine Bay Made Using The MAX EMC Mold OVERSIZE MOLD MAKING WITH MAX EMC A/B Rear Diffuser MAX EMC A/B: Available In A Larger 1 Gallon Kit Size https://www.ebay.com/itm/311949177758 PHYSICAL PROPERTIES Density (Mixed) 0.95 grams/cc Foam and Color Part A – White Putty Part B – Off White Putty Viscosity Mixed Thixotropic, Non-Sag Putty Mix Ratio Equal Parts By Weight Or By Volume Working Time 85 Minutes @ 77°F (25ºC) (200 gm mass) Peak Exotherm 120°F 300 gram mass Cure Time 24 Hrs. Minimum or 2 Hrs. @ room temperature plus 120 min.@ 212°F (100°C) MECHANICAL PROPERTIES Hardness 90 ± 5 Shore D Tee-Peel Strength 180° 3.2 Lbs. per inch Width Aluminum to Aluminum Compressive Strength 15,800 psi @ 77°F (25°C) Tensile Shear Strength 2,700 psi @ 77°F (25°C) 2,200 psi @ -112°F (-80°C) 950 psi @ 212°F (100°C) Elongation 1.3% Maximum Yield Tensile Strength 5,800 psi Service Temperature -67°F to 250°F *****************************************************PLEASE CHECK OUT OTHER AVAILABLERESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store! IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product. The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this product's fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to the refund of the purchase price or product replacement within the agreed warranty period. Polymer Composites Inc and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 48.56 USD
Location: Ontario, California
End Time: 2024-10-28T23:20:20.000Z
Shipping Cost: 0.72 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: MAX EMC Epoxy Molding Clay
Modified Item: No
Country/Region of Manufacture: United States
California Prop 65 Warning: ●EPA SARA Title III Section 313 above ‘de minimus’ level: None ● ●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): None ● ●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): This product does not contain any chemicals known to the State of California to cause cancer. ● ●All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30● ●●●For more information go to https://www.p65warnings.ca.gov/●●●
Tooling Epoxy Compound: Patching Compound
Molding Epoxy Resin: Composite Clay
Country of Manufacture: United States
Type: Epoxy Resin
MPN: MAXEMC64OZ
Brand: MAX EMC Epoxy Molding Clay
