Empirical Labs EL-9 Mike-E Microphone Preamp & Compressor (2-pack) Bundle

Description: A Versatile High-performance Mic Pre/Compressor For Any Situation! Sweetwater is an Authorized Empirical Labs Dealer Genuine New Item Sweetwater's 2-year warranty Empirical Labs EL-9 Mike-E Microphone Preamp & Compressor (2-pack) Bundle Channel Strip with Microphone Preamp, DI, and Compressor/Limiter with Sidechain Input A Versatile High-performance Mic Pre/Compressor For Any Situation! Empirical Labs’ Mike-E channel strip manages to do many things very well! First and foremost, it’s a modern digitally controlled mic preamp. An extremely low-noise transformer on the input amplifier keeps the signal strong and clean. The input section also features a high-performance DI for direct-input instruments such as guitar and bass. Polarity, highpass filter, and 48V phantom power switches come next, followed by the CompSat section, which is comprised of a Saturator, Compressor, Emphasis, and Mix Control. These four circuits come together in the Empirical Labs Mike-E to enhance your tracks with everything from classic knee compression and limiting to colorful vintage-style saturation. On its rear panel, Mike-E features balanced and unbalanced I/O, as well as sidechain input and stereo link jacks. Empirical Labs’ Mike-E is very well-spec’d and equipped, indeed, and at its quite reasonable price point, an excellent value!A truly impressive mic pre Mike-E is, above all, a fine example of what a great preamp should be. It is packed with unusual features to warm and soften the source, along with an excellent compressor/limiter to punch it up. Mike-E offers incredible performance via its Lundahl transformer-coupled mic preamp, whose noise floor is far below any microphone’s self noise. The super-low-noise input amplifier section features gain that is digitally controlled. Mike-E’s signal-to-noise spec exceeds any microphone’s — nominally above 130dB with 40dB of gain. Having used many mic preamps over the years, engineers at Sweetwater appreciate Empirical Labs’ implementation of a unique stepped gain control designed to resist the degradation that typically affects older detented switches and potentiometers. A healthy 74dB of gain (including the unit’s 14dB of output gain) is available with the CompSat section bypassed, more than enough to handle any microphone in your collection — even passive ribbons. Of course, 48-volt phantom power is provided for your condenser mics.Unique compressor section The one-of-a-kind Mike-E “CompSat” section is an innovative compression and saturation circuit that offers versatile coloration and classic knee compression. The exclusive CompSat section sets the Mike-E apart from all other mic preamplifiers. It is comprised of four sections: Saturator: This is a multi-stage soft clipping circuit. At lower levels, a triode type saturation affects the signal. As the level increases, a second unique clip circuit that includes Germanium semiconductors starts to more severely flatten out the peaks. An LED labeled BAD! lights up to warn of harder non-musical clipping. Compressor: This is an uncompromising compressor/limiter circuit that allows detented control of attack and release for easy, reliable settings recall. You adjust the amount of compression with the Drive knob, which adjusts the level going into the compressor. In some ways, it is quite Distressor-like, but it has other differing characteristics, including a much longer available attack time and additional circuitry. Four ratios are provided, 2:1 being the gentlest with a long 20dB knee, good for subtle compression while tracking or strapped across a mix bus. Ratios 4:1 and 8:1 are steeper but still very smooth with long knees. Nuke is very steep (limiter-like) and has a different attack and release shape. Emphasis: The Emphasis circuit tames high-frequency “pile-ups” and provides frequency-dependent saturation, further enhancing the creamy coloration of the Mike-E. It actually consists of two circuits that surround the CompSat. Pre-emphasis boosts the high frequencies prior to the compressor and saturator, while de-emphasis cuts those frequencies after the CompSat. Emphasis has the added advantage of improving signal-to-noise. (This is the reason analog tape decks used emphasis). Mix Control: The modern recording engineer often employs the technique of mixing between the compressed and the uncompressed (dry) signal. This “parallel processing” can often help maintain transients and a sense of dynamic range while enhancing the low level nuances. Mike-E has an onboard Mix control to mix in the uncompressed signal with the compressed signal.Sidechain input for creative ducking Every dynamics processor has a sidechain circuit that examines the signal and determines how much the VCA will reduce gain — but not every unit provides access to its sidechain. In compressors without a separate sidechain input, your main input signal is, essentially, compressing itself. With compressors that have a separate sidechain input — like the Empirical Labs Mike-E — you can introduce a different signal that determines the compression action on the main signal to achieve everything from “pumping” effects to auto-ducking music under a voiceover, as is common in radio commercials.Empirical Labs Mike-E Channel Strip Features: Mic preamplifier with super low noise and stepped gain Highest-quality components used throughout High-performance DI for direct-input instruments “Colored” 80Hz highpass filter emulates the warm low-frequency cut of vintage equalizers Polarity switch inverts audio signal 180 degrees CompSat offers both a musical Compressor/Limiter and a unique tape-like saturation circuit Emphasis: high-frequency emphasis system softens high-frequency pile-ups and adds color enhancement Mix Control allows the blending of the Compressed/Saturated signal with the unprocessed dry signal Frequency Response: 3Hz–200kHz on (CompSat out); 3Hz–150kHz (CompSat in) Signal to Noise:130dB (40dB gain) Maximum output: +28dBu Distortion: .0006%–15% (depending on mode and settings Input Impedance: 600 ohms; Output impedance: < 38 ohms EL-9 Mike-E Microphone Preamp & Compressor Specifications: SpecificationDetail Preamp Type Solid State Channel Strip Number of Channels 1 Phantom Power Yes Polarity Switch Yes EQ 80Hz Highpass Filter Compressor Yes Other Processing Compressor, Saturation Frequency Response 3Hz-200kHz Analog Inputs 1 x XLR. 1 x 1/4", 1 x 1/4" (Hi-Z) Analog Outputs 1 x XLR, 1 x 1/4" Other I/O 1 x 1/4" (link) Rack Spaces 1U Power Source Standard IEC AC cable Height 1.75" Depth 10" Width 19" Weight 14 lbs. RETURN INFORMATION We want you to be completely happy with your purchase from Sweetwater. If you are not satisfied with your product, you may return it for a refund of the purchase price within 30 days. If your purchase was eligible for Free Shipping, the shipping cost will be deducted from your credit or refund. Returns must be in the complete and original packaging with all accessories and complete documentation (Owner's Manual, warranty card, quick start guides, etc.), show no signs of wear or use, and include a Return Authorization number or be subject to a restocking fee. Fast, FREE Shipping! Nearly every order received by 3PM Eastern ships the SAME DAY! FREE shipping to lower 48 states. Our central location reaches most states in 1-4 business days 99.95% warehouse accuracy We are proud to provide some of the fastest turnaround times on eBay. We use FedEx or UPS for most items, and USPS for smaller items. Residents of Hawaii, Alaska, and Puerto Rico should contact us for a shipping quote. PLEASE NOTE: We cannot ship large items to PO boxes, please provide an alternate address. If you have questions, feel free to contact us. Buy with confidence! Sweetwater's been selling on eBay since 2001, with 99.9% positive feedback! More than 30 years in business World-class customer service Fast, FREE shipping Free 2-year warranty on nearly every product Free tech support from audio experts

Price: 3398 USD

Location: Fort Wayne, Indiana

End Time: 2024-11-19T04:33:45.000Z

Shipping Cost: 0 USD