Electronic Cabinet Lock, RFID Locks for Cabinets DIY Lock,【with Battery】，Punc...

Description: Note: This lock has been set using a proximity card. Install the battery and you are ready to use. If you need to reconfigure the card, the instructions to configure it. [This product contains batteries] Set the card at the factory, the operation steps are as follows; 【1】: Install the battery, use a toothpick, click the factory reset button on the lock body for 3 seconds, and release it after hearing the sound of [drop]. When the sound is over, use the IC card to continuously sense the lock body twice, at this time the lock body is opened. Do not do anything at this time, wait for the lock body to close automatically. The first card sensed at this time is the management card 【2】: After the lock body is closed, use the management card to sense the lock body once, and then quickly configure the RFID card / tag, and within 5 seconds (Note: When setting other management cards, use the management card to sense the lock body. Induct the lock body once with the added IC card, and all the added cards should be completed within 5 seconds). 【3】: At this time, the configuration of adding an ID card is completed, and 13 cards can be provided continuously. 【4】: When the card is in a low voltage state, you can open the lock through the user card; if you hear 8 [Dididi] sounds again, the lock tongue will not close, and the lock is always open, reminding customers to replace the battery 【5】：This product has multiple setting modes. For other setting modes, please check the manual. 【6】: Finally, if you have any problems with the use, please us and we will try our best to solve your troubles. Kit includes: 1xLock, 1xLatch, 2x RFID card, 3x RFID tag, 1x screw package, 1x RFID location icon, 4x battery Electronic Cabinet Lock Kit: Suitable for Home Cabinets, Drawers, Lockers, Storage Boxes, Gyms, Swimming Pools, Libraries, Factories and Offices, Etc., for a Wide Range of Uses. Electronic Cabinet Lock: Easy to Operate, Easy to Install, The Key Can be Programmed Into the Lock Before Use, Can Be Used, Can Program Multiple RFID Cards or Labels (Including: 2 * RFID card, 3 * RFID Tag) Induction Lock: Suitable for Wooden Cabinets-RFID Cards Can Penetrate Thicker Wooden Boards (Up to 38mm / 1.5 inches), Have a Slightly Lower Power Consumption, Are Easy to Install, Do not Require Drilling, and Can Be Installed By screws Only. Can Be Used to Make Duplicate Keys. Ideal for Cabinets, Lockers, Cabinets, Carts, Data Racks, Cases and Safes RFID Lock: With Low Voltage Protection, An Alarm Will Be Issued, And the Battery Should Be Replaced Immediately After the Low Voltage Is Prompted. Multiple Unlock Modes。KEY FOR MULTIPLE LOCKS - This RFID Locks are Programmable, and You Can Use Key (RFID Card/Fob) to Unlock Several Cabinet Locks As You Want. The Only Thing You Need To Do: Program The Key Into the Locks and Test it Before Installation.

Price: 26.49 USD

Location: Spring Lake, New Jersey

End Time: 2024-12-23T18:56:49.000Z

Shipping Cost: 0 USD