Description: Description: ➯ This electric longboard skateboard control system has an EMP control module with a remote module, it can do whatever as ESC does, ESC would be easy to damage, this control module would be more stable and cheaper. ➯ Made of high-quality chip and electronic components, dual-drive design can offer excellent and stable performance. ➯ The solid structure of the mainboard can greatly lengthen the service life. With a remote receiver module, so it supports remote control. The well-organized circuit board is easy to install but needs professional skills. ➯ It comes with a portable controller, it has an ergonomic shape, very comfortable to hold and use. 4 different speed modes: high-speed sport mode, high-speed economy mode, middle-speed mode, low-speed mode. ➯ With an LED indicator that displays signal status, speed modes, battery percentage. Features: ➤ Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on. ➤ The upgrade dual-motor drive ESC is a double layer board and much better than other ESC. ➤ Wireless 2.4G remote control transmission to control. (The maximum distance can reach 20 meters.) ➤ Also, have single/dual motor drive ESC for hub motor ➤ Support 5055/5065/6354/6374/6384 belt motor ➤ Protection: Overvoltage, Undervoltage, Overtemperature, Stall, CW/CCW, Overcurrent, Speed Control. Specification: Rated Voltage: 36V Current: 12A Rotate speed: 4200RPM Drive mode: Dual Motor Drive Max. speed: 35KM/H Power: 430W(36V) Weight: about 250g/8.82 ounce Max. Loaded: 120kg/264.55 lbs Remote distance: 20m/65.62ft (Max.) Sensing method:: Hall Power connector: XT60 plug Hall interface: 5pin 2.0 connector Motor plug: 4mm Banana Size: approx. 18.5 x 10 x 5cm/7.28 x 3.94 x 1.97 inch Installations: 1: Connect the main control to the power supply. 2: The power is turned on, wait for two seconds, then press and hold the key for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button inside the small hole in the lower-left corner of the remote control. 4: The remote control is turned off for two seconds and then turned on. Wait for the remote control signal light and the switch signal light to flash at the same time to indicate that the match is successful. Package includes: 1x ESC Substitute Control 1x USB to Micro-USB Cable 1x LED Battery Indicator 1x 2.4G Remote Control Transmitter 1x Switch NOTE: 1. No Installation Guides are included, professional usage is strongly recommended. 2. The driver board is a high-precision circuit board. Do not touch the metal object/liquid to the board before and during use to avoid internal short circuits! 3. 24v ESC must use a voltage above 24v, the maximum voltage can be used is 29.4v (the ESC won't work below 24v). 4. 36v ESC must use a voltage above 36v, the maximum voltage can be used is 48v (the ESC won't work below 36v). Note: Please allow minor errors due to manual measurement. Item color displayed in photos may be showing slightly different since monitors are not calibrated same. Payment: We only accept Payoneer. Payoneer is the only online payment method we accept. Please make sure you have a valid/confirmed Payoneer account prior bidding. And please make sure that your Payoneer registed address is the same with your eBay registed address. Shipping: It usually takes about 10-30 working days to arrive for economy shipping which not including tracking number; 7-15 working days for standard shipping which including tracking number. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Note: It may takes more than 30 working days to other countries such as Mexico,Brazil,Chile,Peru, because they is far away from China. PS: We also offer faster shipping service (3-5 days to deliver), such as DHL,EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it. Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding. Return Policy: If you are dissatisfied with our item or service, then please follow the good eBay practice to contact us by eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner. We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message. Only unused, undamaged and original condition item can be qualified for a return. Feedback: We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your email within 24 working hours.
Price: 56.99 USD
Location: China
End Time: 2024-02-16T04:38:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
MPN: Does Not Apply
Custom Bundle: No
Modified Item: Yes
Country/Region of Manufacture: China
Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on
Current: 12A
Drive mode: Dual Motor Drive
Hall interface: 5pin 2.0 connector
Max. Loaded: 120kg/264.55 lbs
Max. speed: 35KM/H
Motor plug: 4mm Banana
Package 1: 1x ESC Substitute Control
Package 2: 1x USB to Micro-USB Cable
Package 3: 1x LED Battery Indicator
Package 4: 1x 2.4G Remote Control Transmitter
Package 5: 1x Switch
Power: 430W(36V)
Power connector: XT60 plug
Rated Voltage: 36V
Remote distance: 20m/65.62ft (Max.)
Remote frequency: 2.4ghz
Rotate speed: 4200RPM
Sensing method: Hall
Size: 7.28 x 3.94 x 1.97 inch
Support Motor: 5055/5065/6354/6374/6384
upgrade dual-motor drive ESC: a double layer board and much better than other ESC
Weight: about 250g/8.82 ounce
Wireless 2.4G remote control: The maximum distance can reach 20 meters
UPC: Does not apply