Description: If you have any questions or concerns, please do not hesitate to message us. ➯ This electric longboard skateboard control system has an EMP control module with a remote module, it can do whatever as ESC does, ESC would be easy to damage, this control module would be more stable and cheaper. ➯ Made of high-quality chip and electronic components, dual-drive design can offer excellent and stable performance. ➯ The solid structure of the mainboard can greatly lengthen the service life. With a remote receiver module, so it supports remote control. The well-organized circuit board is easy to install but needs professional skills. ➯ It comes with a portable controller, it has an ergonomic shape, very comfortable to hold and use. 4 different speed modes: high-speed sport mode, high-speed economy mode, middle-speed mode, low-speed mode. ➯ With an LED indicator that displays signal status, speed modes, battery percentage. Features: ➤ Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on. ➤ The upgrade dual-motor drive ESC is a double layer board and much better than other ESC. ➤ Wireless 2.4G remote control transmission to control. (The maximum distance can reach 20 meters.) ➤ Also, have single/dual motor drive ESC for hub motor ➤ Support 5055/5065/6354/6374/6384 belt motor ➤ Protection: Overvoltage, Undervoltage, Overtemperature, Stall, CW/CCW, Overcurrent, Speed Control. Specification: Rated Voltage: 36V Current: 12A Rotate speed: 4200RPM Drive mode: Dual Motor Drive Max. speed: 35KM/H Power: 430W(36V) Weight: about 250g/8.82 ounce Max. Loaded: 120kg/264.55 lbs Remote distance: 20m/65.62ft (Max.) Sensing method:: Hall Power connector: XT60 plug Hall interface: 5pin 2.0 connector Motor plug: 4mm Banana Size: approx. 18.5 x 10 x 5cm/7.28 x 3.94 x 1.97 inch Installations: 1: Connect the main control to the power supply. 2: The power is turned on, wait for two seconds, then press and hold the key for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button inside the small hole in the lower-left corner of the remote control. 4: The remote control is turned off for two seconds and then turned on. Wait for the remote control signal light and the switch signal light to flash at the same time to indicate that the match is successful. Package includes: 1x ESC Substitute Control 1x USB to Micro-USB Cable 1x LED Battery Indicator 1x 2.4G Remote Control Transmitter 1x Switch NOTE: 1. No Installation Guides are included, professional usage is strongly recommended. 2. The driver board is a high-precision circuit board. Do not touch the metal object/liquid to the board before and during use to avoid internal short circuits! 3. 24v ESC must use a voltage above 24v, the maximum voltage can be used is 29.4v (the ESC wont work below 24v). 4. 36v ESC must use a voltage above 36v, the maximum voltage can be used is 48v (the ESC wont work below 36v). FREE SAME BUSINESS DAY MONDAY- FRIDAY. No shipping on Weekends or US Public Holidays. No responsibility for any custom duty Shipping information will be updated when available. Immediate payment is required. Shipping will be arranged within 1-5 business days once payment is cleared. To uphold a shipping speed, your order will be processed almost immediately. If you change your mind after your payment is confirmed,we will do our best to cancel the order, however, we CANNOT guarantee the cancellation. We stand behind our items and offer 30 days warranty. All items are in new and working condition unless specified otherwise elsewherein the description. All Returns - defective or otherwise - MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get anauthorization and return address. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If youdo not wish to wait for a replacement, please repurchase the item. We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about yourtransaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help.
Price: 56.99 USD
Location: China
End Time: 2024-01-22T02:44:29.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Current: 12A
Modified Item: Yes
Country/Region of Manufacture: China
Brand: Unbranded
Custom Bundle: No
Max. speed: 35KM/H
Power: 430W(36V)
Rated Voltage: 36V
Rotate speed: 4200RPM
Size: 7.28 x 3.94 x 1.97 inch
Sensing method: Hall
Wireless 2.4G remote control: The maximum distance can reach 20 meters
UPC: Does not apply
MPN: Does Not Apply
Hall interface: 5pin 2.0 connector
Support Motor: 5055/5065/6354/6374/6384
Weight: about 250g/8.82 ounce
Application areas: scooters, wheelbarrows, torsion cars, balance cars and so on
Drive mode: Dual Motor Drive
Max. Loaded: 120kg/264.55 lbs
Motor plug: 4mm Banana
Package 3: 1x LED Battery Indicator
Package 5: 1x Switch
Package 4: 1x 2.4G Remote Control Transmitter
Remote distance: 20m/65.62ft (Max.)
Remote frequency: 2.4ghz
upgrade dual-motor drive ESC: a double layer board and much better than other ESC
Package 1: 1x ESC Substitute Control
Package 2: 1x USB to Micro-USB Cable
Power connector: XT60 plug
