Description: Features:100% brand new and high qualityWidely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.The advantage of the plastic tube relative to the copper tube is that it is more resistant to high temperatures and has high applicability.Note:If you want to connect this pump to AC power, you will need a power converter (not include).This pumping unit is designed for pumping engine oil, transmission oil, brake oil. Due the gasoline is highly corrosive, not recommended use.Using Method:1. Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.2. Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.3. Open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move.4. Put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely.As no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)5. After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.6. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.Specification:Rated Voltage: DC 12VRated Power: 60WMaximum Flow: 5L/minMaximum Pressure: 0.8MPAPump Diameter: Approx. 4.5cmLength: Approx. 14.5cmCable Length: Approx. 36cmClips Length: Approx. 8cmPVC Outlet pipe Length:145cmNylon Pipe Length:100cmPlastic Pipe Length:100cmColor:As Picture ShowWhat is included:1x Oil Pump1x Outlet pipe1x 6X4mm Nylon pipe1x 8X5mm Plastic pipeOn Apr 22, 2024 at 21:39:01 PDT, seller added the following information:
Price: 24.6 USD
Location: Ontario, California
End Time: 2024-11-22T10:53:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Voltage: DC 12V
Power: 60W
Maximum Flow: 5L/min
Brand: Unbranded
MPN: Does not apply
Model: Electric Fuel Transfer Pump
UPC: Does not apply
EAN: Does not apply