Earthquaker Devices Avalance Run V2 Stereo Delay/Reverb Pedal

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer - Full Warranty Earthquaker Devices Avalance Run V2 Stereo Delay/Reverb Pedal Stereo Delay/Reverb Pedal - Brand New - Description The Avalanche Run is a dreamy stereo sonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning... Controls Time: This controls the delay time and goes from 0 ms to just under 2000ms. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right, and get a flat response in the middle. Mix: This is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls. Decay: Controls the reverb decay length R Mix: Controls the reverb mix Time: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob. Repeats: Controls the delay repeats D Mix: Controls the delay mix Toggle: This takes over for the toggle switch and will cross fade from forward delay in the heel down position to reverse delay in the toe down position. Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch. 1/1: Quarter Note 3/4: Dotted 8th 2/3: Quarter Note Triplet 1/2: 8th Note 1/3: 8th Note Triplet 1/4: 16th Note Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise. Toggle Switch (Mode Selector) Normal: This is the “standard” delay and reverb mode Reverse: This is reverse delay mode with “standard” reverb Swell: This is the volume swell mode Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up. To Run Mono Use the left input and output only. To Run Stereo Use both left and right inputs and outputs To Run Mono In and Stereo Out Use the left input and both left and right outputs Cool Trick Plugging into the right input and using the left and right outputs will give you an all-wet left channel and a standard mixed right channel while the effect is engaged. You can create dramatic stereo effects by keeping the Mix set low and turning up the amplifier source connected to the left output. The left output will not pass a dry signal when the effect is turned off in true bypass mode but in trail mode, it will still produce the affected signal as long as it is set to decay. Features/Specs Dimensions 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs Current Draw 410 mA Input Impedance 1 MΩ Output Impedance 100 Ω S/N Ratio 115dB typical 24-bit 96kHz A/D & D/A converters All analog dry signal path All digital wet signal paths with 20Hz – 20kHz frequency response Expression Jack The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper. We recommend using a Moog expression pedal with the output adjustment knob all the way up. We cannot guarantee any other expression pedal to work with the Avalanche Run. Flexi-Switch Technology This device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay-based, it requires power to pass the signal. Power For best results, please use the included 9v center-negative 1-amp DC power supply. PCBs are populated by a combination of artificial and human intelligence in the Akron, Ohio of America. Each and every Avalanche Run is completely assembled, wired, and tested by total human beans in the tiny tundra town of Akron, Ohio. We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 299 USD

Location: Winchester, Virginia

End Time: 2024-10-09T14:02:53.000Z

Shipping Cost: 0 USD