Dim Bulb Tester/Current Limiter for Amplifiers, Stereos, Receivers, Guitar Amps

Description: Note that the bulb and bulb cage are not included We all know the temptation to rush home and plug in our "new" old amplifier, receiver, radio, or other gear. However thats always a good way to have a bad time. There's always a chance of a short in the cord or circuits, a failed capacitor or transistor, drifting resistor, or other serious problems or failures that are not evident to the naked eye. Powering the gear up unprotected could potentially damage expensive, unobtainable, or irreplaceable parts, creating further failures in the gear or worse, causing a fire. A dim bulb tester is an effective and simple tool that allows for safe startup even in the case of a serious problem, such as a short and keeps the magic smoke where it belongs. The dim bulb tester places an incandescent light bulb between you new "old" gear and the AC power in the wall. This way, if your gear has a short circuit or other issue which could result in excessive current draw, it will simply light up the bulb rather than further damaging and of the electronics. To use simply: Install a properly rated incandescent light bulb in the included light socket (often times 100 watts will due the trick but some research online will give you further instruction). Bulb not included Ensure both the Dim Bulb Tester and gear have their power switches in the off position Plug the power cord of the gear into the "Load" outlet of the Dim Bulb Tester Next plug the dim bulb tester into the wall Turn the power switch of the gear to the on position Finally turn the switch on the dim bulb tester to the on position. If there is no short or issue causing excessive current draw, the bulb may light upon power up then dim to a low level glow or completely dim to the point where no light is being produced (See Photo 9). This indicates that the devices should be safe to plug in directly to the power outlet. However, if there is a short the bulb will not dim and will continue to glow brightly (see Photo 10). This indicates that there is a serious issue with the gear and that repairs need to be preformed. Turn the switches to the off position quickly. All dim bulb testers are tested prior to shipping to ensure full functionality. BULB NOT INCLUDED DISCLAIMER This Dim Bulb Tester/Current Limiter is provided as is without any guarantees or warranty. In association with the product, Ebay Seller paintballer1280 makes no warranties of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, of title, or of noninfringement of third party rights. Use of the product by a user is at the user’s risk. Ebay Seller paintballer1280 expressly disclaims any responsibility for any damage, injury, harm, cost, expense, or liability arising out of or related to your use or misuse of this product. This product is provided on an as-is basis and without warranty of any kind, whether express, implied, or statutory, including, but not limited to, warranties of merchantability, fitness for a particular purpose, title, accuracy, non-infringement, or quality. Some jurisdictions do not allow an exclusion of implied warranties. If you are located in such a jurisdiction, you are advised to seek legal advice to determine if this exclusion applies to you.Ebay Seller paintballer1280 will not be liable to you under any legal theory, whether in warranty, contract, strict liability, tort, or negligence, for any damages, claims, injuries, judgments, costs, or liabilities of any kind arising out of or related to your use or misuse of this product, including, but not limited to, personal injury, damage to property, loss of business, loss of income, special damages, incidental damages, consequential damages, punitive damages, or exemplary damages, whether foreseeable or unforeseeable.

Price: 30.75 USD

Location: Conshohocken, Pennsylvania

End Time: 2024-08-10T01:27:21.000Z

Shipping Cost: 0 USD